RY15523AVNM ((313284101)) Ryobi Trimmer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William from SPANISH FORT, AL
- Parts Used:
- 638016003
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers, Socket set
Noise and wobbles during spin cycle.
Ordered the hub repair kit. I had much difficulty removing the agitator. It was stuck. Running the strap under it and tapping on the agitator assembly should've caused it to pop up but didn't. I had to ultimately strike it hard with a metal hammer. That released it but caused a hole in the agitator. The center metal gear on the agitator was very worn and rusty. I decided to also replace the agitator. I saved about $300 on the repair.
Was this instruction helpful to you?
Thank you for voting!