Models > PP25CFA

PP25CFA ((967185601)(2013-07)) Poulan Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This is a genuine Poulan replacement part, it is sold individually. The purpose of the 530038682 Trigger is to control the speed at which the spool and line rotates on the model shown below. It is con...
No Longer Available
This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams f...
In Stock
Order now and your part arrives by Apr 2
This is an authentic OEM sourced replacement piston ring used on gas Trimmers and blowers. A worn or broken piston ring will allow combustion gases to escape the seal and enter the crankcase, causing...
In Stock
Order now and your part arrives by Apr 2
$58.36
This is a genuine OEM replacement part, it is sold individually. It is used on specific Gas Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engi...
In Stock
Order now and your part arrives by Apr 2
In Stock
Order now and your part arrives by Apr 2
The fixed-line cap has been sourced from the original manufacturer to ensure quality. The cap is intended to be used with trimmers from Weed Eater. The hard plastic cap is used to secure the bottom po...
No Longer Available
This genuine replacement coupler is sourced from the original manufacturer and is designed for use with trimmers from Poulan and Husqvarna. It connects the upper and lower sections of the drive shaft ...
In Stock
Order now and your part arrives by Apr 2
$12.07
This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Paramount and Poulan lawn and garden equipment. It is a standard hardware which has multiple applicatio...
In Stock
Order now and your part arrives by Apr 2
This cover-air box is a genuine OEM sourced replacement part. it is not an aftermarket imitation. This part is specially designed for Poulan string trimmers and pole pruners. It is used to secure the ...
In Stock
Order now and your part arrives by Apr 2
This replacement part is supplied by original equipment manufacturer for use with handheld string trimmers and edgers. In conjunction with the bolt this wingnut is generally used to secure the auxilia...
In Stock
Order now and your part arrives by Apr 2
The metal clutch has been OEM sourced to be used with trimmers, pruners, and brushcutters from Poulan, Weed Eater, Husqvarna, and Jonsered. The clutch assembly fits into the clutch drum and is connect...
In Stock
Order now and your part arrives by Apr 2
This is a genuine OEM approved replacement part designed for use with Hitachi nailers. The piston is a central component of an engine. It both provides compression within the engine, as well as transf...
In Stock
Order now and your part arrives by Apr 2

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rosanne from BRIDGEWATER, VA
Parts Used:
545227901
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Clogged muffler
Remove the 4 screws holding the rear motor casing. Then you can take the easy route and drill through the front motor housing with a 3/8 to 1/2 bit in order to access the front muffler screw. If you want to work harder you must remove the motor from the shaft, remove the clutch assembly (this requires a long 15t torx bit, removing the spa rk plug to stuff the piston with rope or rag to seize up the piston, and then removing the front motor casing to access the front muffler screw). Once you access both muffler screws remove them with the t20 torx driver. Install the new muffler with the small gasket inside the housing, and the larger gasket/heat shield between the muffler and the motor.
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!