Models > M2500

M2500 (41BDZ01C758) Murray Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for M2500

Viewing 2 of 2
Engine Assembly Diagram and Parts List for 41BDZ01C758 Murray Trimmer
Engine Assembly
General Assembly Diagram and Parts List for 41BDZ01C758 Murray Trimmer
General Assembly
Keep searches simple, eg. "belt" or "pump".
Trimmer Bump Head Knob – Part Number: 791-153066B
$20.40
This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...
In Stock
Order now and your part arrives by Mar 19
Fuel Tank Assembly – Part Number: 753-06183
$20.92
This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is ...
In Stock
Order now and your part arrives by Mar 19
Spark Plug – Part Number: 753-06847
$11.13
This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combust...
In Stock
Order now and your part arrives by Mar 19
Line Trimmer Spool – Part Number: 753-1155
$28.89
This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.
Special Order
Clutch Asm Small – Part Number: 753-05860
$35.80
Genuine OEM replacement kit used on Gas Trimmers and Tillers. This part includes: Clutch Drum, Clutch, Clutch Washer and the Screw which has a left-handed thread. A centrifugal clutch is a part that u...
In Stock
Order now and your part arrives by Mar 19
Spring-spool – Part Number: 791-610317B
$16.57
Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose...
In Stock
Order now and your part arrives by Mar 19
Aircleaner Filter – Part Number: 753-06417
$6.25
This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and ...
In Stock
Order now and your part arrives by Mar 19
Carburetor Gasket – Part Number: 753-06253
$6.25
This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carbure...
In Stock
Order now and your part arrives by Mar 19
Carburetor O-ring – Part Number: 753-06185
$6.25
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburet...
In Stock
Order now and your part arrives by Mar 19
Aircleaner Cover Assembly (includes 26) – Part Number: 753-06415
$6.29
This is a Manufacturer Approved replacement part designed for Gas String Trimmers. The purpose of this Cover is to secure Foam Filter which is Sold Individually and protect internal parts like Carbure...
In Stock
Order now and your part arrives by Mar 19
Spring Throttle Trigger – Part Number: 791-182690
$12.28
This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with handheld trimmers/edgers. This spring helps the throttle trigger to retract. It is made out of me...
In Stock
Order now and your part arrives by Mar 19
Retainer (10 pack) – Part Number: 791-610660
$7.50
This is an OEM replacement part from Ryobi. The retainer is used in trimmers, and fits between the spring and the outer spool assembly. It helps to hold the spool in place. This retainer is sold as an...
On Order
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for M2500

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing
How to fix it
Cutting line does not come out
Fixed by these parts
Fixing
How to fix it
Engine revs but trimmer head will not turn
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Erik from ROBERTSDALE, AL
Parts Used:
753-06183
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from GLENN HEIGHTS, TX
Parts Used:
753-06183
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Super Easy Install
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More