41AD7EBC034 MTD Trimmer - Parts

This is a primer and hose assembly, and it is used on various lawn equipment. The assembly comes with two parts. The first is the hose which is almost 5 inches long, and less than a 1/4 inch thick. Th...

This fuel line filters the fuel in the tank as it pushes into the carburetor by the primer bulb. If your carburetor is not getting fuel, ports get clogged, or the fuel line is leaking, then replacing ...

This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line r...

This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...

This air filter fits a variety of power tools. The filter keeps dirt, debris and other small particles from entering the carburetor and engine, which can cause internal engine damage. If your filter i...

This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose...

This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman trimmers. The trigger allows you to control engine speed, which in turn permits you to safely c...

This is a genuine OEM sourced replacement part designed for use with string trimmers. This item is made out of metal and it is sold individually. It is the upper shaft that is attached to the motor. ...

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for repl...

This part is an OEM from the Ryobi manufacturer. The lower flexible drive shaft (24 3/4") is made of metal, and is compatible with multiple tools and machines. This part is used to operate the device ...

This is an OEM replacement part from Ryobi. The retainer is used in trimmers, and fits between the spring and the outer spool assembly. It helps to hold the spool in place. This retainer is sold as an...