Models
>
128C
128C (2010-08) Husqvarna Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 128C
Viewing 2 of 2_WW_1.gif "Page A Diagram and Parts List for 2010-08 Husqvarna Trimmer")
_WW_2.gif "Page B Diagram and Parts List for 2010-08 Husqvarna Trimmer")
Keep searches simple, eg. "belt" or "pump".
$4.88
This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
In Stock
$7.31
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part ...
In Stock
This is a spark plug for your lawn equipment. This part ignites the air and fuel mixture in the cylinder of the engine to power your machine. If the tip of the spark plug is burnt out or damaged it is...
No Longer Available
In Stock
In Stock
$7.31
This part includes one purge bulb, also known as a primer bulb. It is supplied by the manufacturer to be a direct replacement for the original. The purge bulb is pressed, and this removes the air from...
In Stock
In Stock
$45.17
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines.
Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor.
Work in a...
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 128C
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from ENID, OK
- Parts Used:
- 545008082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
Was this instruction helpful to you?
Thank you for voting!