Models > SRM-2450

SRM-2450 (Type 1E -After S/N 001001) Echo Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for SRM-2450

Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
$18.68
Routine maintenance does not need to be time-consuming, servicing your engine should not take more than 10 minutes with this kit. Inspecting and replacing these parts regularly ensures your engine wil...
In Stock
Order within the next 8 hrs and your part ships today!
This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the...
In Stock
Order within the next 8 hrs and your part ships today!
This is a single OEM fuel filter that has been approved by the manufacturer, ensuring the highest quality. It is compatible with numerous types of outdoor power equipment, such as blowers, trimmers, e...
In Stock
Order within the next 8 hrs and your part ships today!
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order within the next 8 hrs and your part ships today!
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
Order within the next 8 hrs and your part ships today!
In Stock
Order within the next 8 hrs and your part ships today!
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
Order within the next 8 hrs and your part ships today!
$5.19
In Stock
Order within the next 8 hrs and your part ships today!
This is an orange throttle trigger, used on various model types with a small engine. This is an OEM replacement part, ensuring the perfect fit and function. The throttle cable is connected to the trig...
In Stock
Order within the next 8 hrs and your part ships today!
This is a single filter designed to be used in various model-types, ranging from trimmers, edgers, and blowers (to name a few). A well-maintained filter is an essential part to keeping your equipment ...
In Stock
Order within the next 8 hrs and your part ships today!
In Stock
Order within the next 8 hrs and your part ships today!
$4.99
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
Order within the next 8 hrs and your part ships today!
Starter Cover Screw
In Stock
Order within the next 8 hrs and your part ships today!

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Stephen from NAPERVILLE, IL
Parts Used:
A369000480, 99944500071, 13211546730
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Replacing grommet that holds the fuel tubes
Any DIYer can do this. Don’t hesitate.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from COEUR D ALENE, ID
Parts Used:
69900440931
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assemb ly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
steven from MARGATE, FL
Parts Used:
A356000031, 12317135630
Difficulty Level:
Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Won't Start
I ordered the exact parts for my exact unit from the exploded view diagram provided by Parts Select Website. When the parts arrived the Tune Up kit's fuel filter was the incorrect size. The part listed on their website is incorrect, I only ordered based on the information provided on Parts Select Website. When I requested a refund via Par ts Select email address. I never heard another word from them. I had to open dispute from my credit card company.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!