Models > PAS-280

PAS-280 (T44713001001-T44713999999) Echo Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PAS-280

Viewing 46 of 46
Keep searches simple, eg. "belt" or "pump".
$21.15
Routine engine maintenance helps extend the life of your equipment. This OEM maintenance kit contains a fuel filter, an air filter, a pre-filter, and a spark plug. To ensure peak performance you shoul...
In Stock
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
This is a primer pump or primer bulb, and it is used on various outdoor lawn equipment. This part has an outer diameter of 0.616 inches, it is dome shaped, and transparent. The primer pump gives the e...
In Stock
$5.19
In Stock
This is an OEM single layer air filter for power pruners and blowers. This filter is made up of mesh material and is encased in a plastic frame. It removes any dust and debris, which protects the engi...
In Stock
This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guar...
In Stock
In Stock
$4.99
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
This is an OEM quality chain tensioner for a chainsaw. This part is attached to the adjustment screw and fits into an opening on the bar. When you turn the adjuster it moves the tensioner, which eithe...
In Stock
$4.99
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Donald from DISPUTANTA, VA
Parts Used:
69500120331
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
replaces the circular saw blade
removed the cotter pin...removed the nut holding the blade on by turning clockwise(reversed threads)....removed old blade ...placed new blade....replaced nut turning counterclockwise and tightened...placed a new cotter pin....job done
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from COEUR D ALENE, ID
Parts Used:
69900440931
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assemb ly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
AmatoMichael from BROOKLYN, NY
Parts Used:
P021047620
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
I lost them they are used to hang the pas echo attachments
The little hook goes into the hole on the pole the cover gets put in from the big hook facing down towards the smaller hook. Put the smaller hook into the hole than push the cover down with some force then you’re ready to hang the attachment on any hook or anything it can hang off of
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!