PAS-230 (05001001-05999999) Echo Trimmer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Keith from NORWOOD, NJ
- Parts Used:
- A369000460
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Pull off old filter and replace with new. Push back into fuel tank & be done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from DISPUTANTA, VA
- Parts Used:
- 69500120331
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Socket set
replaces the circular saw blade
removed the cotter pin...removed the nut holding the blade on by turning clockwise(reversed threads)....removed old blade ...placed new blade....replaced nut turning counterclockwise and tightened...placed a new cotter pin....job done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from COEUR D ALENE, ID
- Parts Used:
- 69900440931
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- AmatoMichael from BROOKLYN, NY
- Parts Used:
- P021047620
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
I lost them they are used to hang the pas echo attachments
The little hook goes into the hole on the pole the cover gets put in from the big hook facing down towards the smaller hook. Put the smaller hook into the hole than push the cover down with some force then you’re ready to hang the attachment on any hook or anything it can hang off of
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Benny from BURTON, MI
- Parts Used:
- 89011804262
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Added extra decals to the tube
Ordered two extra Echo Decals for the front tube. Original was not installed correctly from factory. So I added two extra to make it look better. This was for my ECHO 8010T Leaf Blower. Nice machine..
It looks real nice with four decals on the end..
It looks real nice with four decals on the end..
Was this instruction helpful to you?
Thank you for voting!