Models > PAS-225

PAS-225 (S86813001001-S86813999999) Echo Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for PAS-225

Viewing 51 of 51
Keep searches simple, eg. "belt" or "pump".
$19.91
In order to keep your equipment running strong, doing regular maintenance is critical. Your small engine should have a tune-up once per year, which consists of replacing the most common wear parts. Th...
In Stock
Order within the next 3 hrs and your part ships today!
$6.59
In Stock
Order within the next 3 hrs and your part ships today!
This is a fuel line grommet, and it is used with various lawn and garden equipment. This part prevents leaking fuel and fumes. The grommet is placed in the fuel tank to seal the opening area where the...
In Stock
Order within the next 3 hrs and your part ships today!
This part is the replacement air filter for your small engine, used for outdoor power equipment. It has a black plastic rim that is approximately 2.5 inches by 2.5 inches. The air filter in your small...
In Stock
Order within the next 3 hrs and your part ships today!
This is a single OEM fuel filter that has been approved by the manufacturer, ensuring the highest quality. It is compatible with numerous types of outdoor power equipment, such as blowers, trimmers, e...
In Stock
Order within the next 3 hrs and your part ships today!
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
Order within the next 3 hrs and your part ships today!
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
Order within the next 3 hrs and your part ships today!
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
Order within the next 3 hrs and your part ships today!
$5.19
In Stock
Order within the next 3 hrs and your part ships today!
This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guar...
In Stock
Order within the next 3 hrs and your part ships today!
This is an OEM carburetor repair kit, which includes all of the components needed to rebuild the carburetor. Many of the parts inside the carburetor are made of plastic and rubber, which are known to ...
In Stock
Order within the next 3 hrs and your part ships today!
Nut
$4.99
In Stock
Order within the next 3 hrs and your part ships today!

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Donald from DISPUTANTA, VA
Parts Used:
69500120331
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
replaces the circular saw blade
removed the cotter pin...removed the nut holding the blade on by turning clockwise(reversed threads)....removed old blade ...placed new blade....replaced nut turning counterclockwise and tightened...placed a new cotter pin....job done
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from COEUR D ALENE, ID
Parts Used:
69900440931
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assemb ly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
AmatoMichael from BROOKLYN, NY
Parts Used:
P021047620
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
I lost them they are used to hang the pas echo attachments
The little hook goes into the hole on the pole the cover gets put in from the big hook facing down towards the smaller hook. Put the smaller hook into the hole than push the cover down with some force then you’re ready to hang the attachment on any hook or anything it can hang off of
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!