SRM-3100 (S Version - Type 1) Echo Trimmer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from COEUR D ALENE, ID
- Parts Used:
- 69900440931
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assembly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- steven from MARGATE, FL
- Parts Used:
- A356000031, 12317135630
- Difficulty Level:
- Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Won't Start
I ordered the exact parts for my exact unit from the exploded view diagram provided by Parts Select Website. When the parts arrived the Tune Up kit's fuel filter was the incorrect size. The part listed on their website is incorrect, I only ordered based on the information provided on Parts Select Website. When I requested a refund via Parts Select email address. I never heard another word from them. I had to open dispute from my credit card company.
Was this instruction helpful to you?
Thank you for voting!