Models
>
SRM-2410
SRM-2410 ((Type 1)) Echo Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This is a fuel return tube, for various lawn equipment. This part is yellow and is 90mm long. The tube is used to return the extra fuel back into the fuel tank. This happens after the primer bulb has ...
In Stock
In Stock
In Stock
$5.19
This is an orange throttle trigger, used on various model types with a small engine. This is an OEM replacement part, ensuring the perfect fit and function. The throttle cable is connected to the trig...
In Stock
$6.96
This is a single filter designed to be used in various model-types, ranging from trimmers, edgers, and blowers (to name a few). A well-maintained filter is an essential part to keeping your equipment ...
In Stock
$4.99
This nut is used for a variety of handheld gardening tools. The nut has multiple applications depending on the tool you are using. Refer to the diagram provided by the manufacturer for installation in...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Robert from COEUR D ALENE, ID
- Parts Used:
- 69900440931
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Echo trimmer had narrow shield. Bought wider one which reduced rocks and debris
Easiest repair ever. Turn the trimmer upside down so you can access the string assembly. Find the small hole in the shaft beneath the string assembly and insert a heavy gauge nail into it to hold the shat in place. Turn the string assembly counterclockwise until it comes off. Lift off the round metal piece that was under the string assemb
... Read more
ly.Find the 3 screws holding the shield in place and unscrew them. Pull the shield off. Install the new one in reverse order. I used the original hex screws as the new ones were philips head. Hex worked perfectly. I was amazed how easy thus was to do.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Leonor from SHARPSBURG, MD
- Parts Used:
- 13031051830, 10151448930
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Original cylinder was cracking apart on my Echo weedeater
Bought a new cylinder cover and bolted it on. Was easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Aidan from THOMASTON, ME
- Parts Used:
- X506000070
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
I was missing the label for the choke on the air filter.
I made sure everything was lined up and stuck it on.
Was this instruction helpful to you?
Thank you for voting!