Models > BL150

BL150 (41BD150G163) Bolens Trimmer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for BL150

Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This is a primer and hose assembly, and it is used on various lawn equipment. The assembly comes with two parts. The first is the hose which is almost 5 inches long, and less than a 1/4 inch thick. Th...
In Stock
This fuel line filters the fuel in the tank as it pushes into the carburetor by the primer bulb. If your carburetor is not getting fuel, ports get clogged, or the fuel line is leaking, then replacing ...
In Stock
This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line r...
In Stock
This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...
In Stock
This air filter fits a variety of power tools. The filter keeps dirt, debris and other small particles from entering the carburetor and engine, which can cause internal engine damage. If your filter i...
In Stock
This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.
In Stock
$10.90
In Stock
$15.24
This is a spark plug, and it is used in a variety of outdoor equipment. The spark plug ignites the fuel in the engine by producing a small spark. This part is RDJ7Y, meaning it is a resistor type, wit...
In Stock
This carburetor gasket is used in various power tools and works to prevent air leaks and protects the carburetor from small particles. Air leaks can disrupt the way the engine works so it is important...
On Order
Special Order
$10.70
This switch is used on a variety of trimmers, blowers and other similar gardening equipment. This switch controls the on and off operations of your tool. Switches have mechanical internals, which degr...
In Stock
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for BL150

Viewing 1 of 1
Will Not Start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rainer from LANCASTER, OH
Parts Used:
753-04333
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
clogged carburetor
replaced old with new
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!