Models > P10D22

P10D22 Magic Chef Trash Compactor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
These bags will fit most 15" rectangular compactors.
In Stock
Order within the next 6 hrs and your part ships today!
This kit comes with an on-off rotary switch and two chrome knobs.
In Stock
Order within the next 6 hrs and your part ships today!
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.
In Stock
Order within the next 6 hrs and your part ships today!
$68.55
This is a genuine OEM replacement part. This foot pedal is designed for use with trash compactors. This foot pedal is located at the bottom of the appliance, it is attached to the footplate. This foot...
In Stock
Order within the next 6 hrs and your part ships today!
Key
$26.44
In Stock
Order within the next 6 hrs and your part ships today!
This is an OEM part sourced directly from the manufacturer. This wheel assembly kit is for use with trash compactors. The kit included two wheel bearings. These bearings allow the container drawer to ...
In Stock
Order within the next 6 hrs and your part ships today!
This part is now brown instead of black.
In Stock
Order within the next 6 hrs and your part ships today!
This part turns the light on/off as the door opens and closes.
In Stock
Order within the next 6 hrs and your part ships today!
$267.42
This motor operates the trash compactor press that helps compacts the trash.
In Stock
Order within the next 6 hrs and your part ships today!
Used for trash compactors.
In Stock
Order within the next 6 hrs and your part ships today!
$99.57
This is an OEM part sourced directly from the manufacturer. This latch assembly is designed for use with trash compactors. This latch holds the container drawer closed when the trash compactor is oper...
On Order
Comes with drawer, frame, rollers and hardware.
No Longer Available

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for P10D22

Viewing 4 of 4
Drawer is hard to open and or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Won’t start
Fixed by these parts
Fixing
How to fix it
Doesn’t stop at end of compacting cycle
Fixed by these parts
Fixing
How to fix it
Light not working
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ron from El Paso, TX
Parts Used:
776594
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Old Plastic Compactor Key Became Brittle and Broke
Original key part number was 776586 as found underneath the the rim of the broken key. It's known as a compactor key, or a key-knob, but in layman's terms, I would call it the "off-on-start" knob. The replacement part number was 386676, and fits perfectly.
The original key had become old and brittle, and eventually just broke a part. This was a 30+ year old Whirlpool Trash Compactor key. I just picked out the bits of the old broken key with needle-nose pliers and then easily inserted the new key into the opening.
Note, this literally works just like a key you would insert into any lock. It doesn't require pushing to "snap" into place, but once inserted and turned to the "ON" position, locks into place. No forcing is required at all.
The new key looks exactly like the original and is working very smoothly.
31 of 35 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ryan from Delta, CO
Parts Used:
675382
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Trash compactor would not start
Remove two screws from panel above trash bin. Remove panel and remove wires from rotary switch. Remove lock ring from switch. Install in reverse order.
21 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Preston from Memphis, TN
Parts Used:
882657
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
To replace old pedal where screw hole was stripped
Had to remove entire drawer from unit to more easily access pedal placement. Removed old pedal. Screwed new pedal in place. Replaced drawer unit. Done.
12 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!