Models > 6657242601 > Instructions

6657242601 Kenmore Trash Compactor - Instructions

Jump to:

All Instructions for the 6657242601

Customer:: Roger from Grantham, NH
Parts Used:: 882688
Difficulty Level:: Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Socket set

Trash bin would not roll out completely

-Removed the forward sliding rail screws...lifted the rails up several inches to access the wheel assembly...bent back the steel tab to access the nuts holding the wheels to the frame...replaced the wheels and bent back the steel tabs to original position. Trash bin now rolls out completely as before

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from Lancaster, CA
Parts Used:: WP9871602
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Wrench set

Roller was flat

Bought wrong roller. The drawer roller is different than the stationary rollers. Note the difference.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Andrew from ASHEVILLE, NC
Parts Used:: 882688
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Socket set

Compactor draw was not opening fully as the wheel bearings had seized

I followed the you tube video instructions provided by customer care. This involved pulling the unit free from the cabinet, removing several screws that held the housing in place, this gave access to the wheel assembly, then I removed the nuts that held the wheel assembly in place. Fitting the new wheel assemblies was easy as was replacing the housing screws. After reinserting the draw and pushing the unit back into the cabinet it worked like new

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Charles from NEWBERRY, MI
Parts Used:: WP9871602
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Rollers wore out

Removed and replaced in less than 15 minutes. Works like new again

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Cindie from DUNMORE, PA
Parts Used:: WPW10001130
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Wrench (Adjustable), Wrench set

Front legs were rotted.

Replace front legs. Very easy fix.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Johnny from LEVITTOWN, PA
Parts Used:: WP302868
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

Lost Screws from lower access covers for my Dishwasher

Reassembled lower access covers using the new screws purchased from parts direct, perfect fit replacement. Hardest part remembering how they fit Dishwasher.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Bruce from ROSWELL, NM
Parts Used:: 882688
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

One of the roller wheels was worn out

Removed drawer
Pulled out from cabinet
Unplugged power cord
Removed top cover
Removed front panel
Put front on 2x4 block
Unscrewed leveling legs
Used 9/16" socket to remove old rollers
Installed new rollers
installed front panel
installed top panel
Plugged in electric cord
slid back into cabinet
inserted drawer
tested
Works as good as new

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Rick from Lennon, MI
Parts Used:: WPW10001130
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Wrench (Adjustable)

Bought a washer without front leveling feet

The repair was simple as you can imagine. Thought I could buy these legs at any big box store or at least at the local hardware store. No such luck. Partselect had the right product---easy to order and easy to install. Things around here are great.

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 6657242601