Models
>
GCG1200S2BW
GCG1200S2BW General Electric Trash Compactor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GCG1200S2BW
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$75.17
This is a genuine OEM replacement part. This is a power nut and it is commonly used in the assembly of trash compactors. This power nut is part of the ram assembly that compacts your trash, it attache...
In Stock
$176.28
Using trash compactor bags is a practical way to remove your waste. Because compactors use such high pressure to compress the waste, using compactor bags designed to handle the force are a necessity. ...
In Stock
Special Order
This part holds the trash compactor bag to make taking out the trash without worrying about tearing the bag.
* This part also comes with the 2 handles.
No Longer Available
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GCG1200S2BW
Viewing 2 of 2Compactor ram gets stuck
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- william from andover, MA
- Parts Used:
- WC36X5071
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
trash compactor ram not moving - broken plastic drive gear
1) pulled the compactor from under the counter and unplugged it. 2) tipped it on its side 3) removed 5 screws (3 on the motor side and two on the bottom) an took off the bottom cover plate. 3) using the pliers i pulled of the retainer clip from the large drive gear(it had broken on only the hub remain attached) 4) i then just slid in the
... Read more
new gear, snapped in the retainer clip and buttoned up the cover plate. Note I did not replace the other parts that came in the package because the existing ones seemed ok.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from Bigfork, MT
- Parts Used:
- WP9870163
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
locking nut was stripped
After calling a repair man and being told my appliance was to old for him to repair I discovered your website. I simply entered the model number and a picture of the part I was looking for was easily found. I ordered online and received the replacement parts 5 day's later. I simply swapped out the old locking nuts with the new ones from
... Read more
your website and the repair was complete. What could have been an easy $100 repair cost a fraction of that and the trash compactor is working just fine.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Porter Ranch, CA
- Parts Used:
- WC36X5092
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
dent in front panel
Really easy. Two screws on the back side. Loosen them and pull the top off. Panel slides right out from the top.
Was this instruction helpful to you?
Thank you for voting!