Models > GCG950T-02

GCG950T-02 General Electric Trash Compactor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GCG950T-02

Viewing 4 of 4
Section Diagram and Parts List for General Electric Trash Compactor
Section
Section Diagram and Parts List for General Electric Trash Compactor
Section
Section Diagram and Parts List for General Electric Trash Compactor
Section
Section Diagram and Parts List for General Electric Trash Compactor
Section
Keep searches simple, eg. "belt" or "pump".
Compactor Bags - 10 Pk – Part Number: WC60X5015
$49.39
The compactor bag is used in a trash compactor, where trash is compressed. This bag is made of a stronger plastic material so that it is able to contain a large amount of trash. It is also strong enou...
In Stock
Order now and your part arrives by Mar 19
Gear Box Kit – Part Number: WC22X5028
No Longer Available
SPROCKET 50 TOOTH – Part Number: WC22X5022
No Longer Available
Drive Chain – Part Number: WC22X5021
Also known as Endless Chain. Sold individually.
No Longer Available
Bag Caddy – Part Number: WC60X5016
No Longer Available
KEY SWITCH – Part Number: WC21X5045
No Longer Available
Drawer with Wheels – Part Number: WC29X5019
No Longer Available
MAIN DRIVE SCREW – Part Number: WC22X5023
No Longer Available
Motor – Part Number: WC26X5022
No Longer Available
SWITCH Assembly TOP LIMIT – Part Number: WC21X5050
No Longer Available
PANEL & SWITCH SCNTRY – Part Number: WC25X5067
No Longer Available
Motor – Part Number: WC26X5021
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ian from Camano Island, WA
Parts Used:
WC22X5021
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Ram was stuck in the down position, would not return up.
1.I removed the back of the compactor
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled eve rything and reassembled.
Read less
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More