Models
>
GCG950-01
GCG950-01 General Electric Trash Compactor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GCG950-01
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ian from Camano Island, WA
- Parts Used:
- WC22X5021
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
Ram was stuck in the down position, would not return up.
1.I removed the back of the compactor
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled eve ... Read more rything and reassembled.
2. turned the large nut to raise the ram so I could remove the trash container
3. removed the bolt holding ram plunger onto the actuator
4. put the chain on by starting it on the large sproket and walking it around. there was enough slack to do it this way.
5. cleaned and oiled eve ... Read more rything and reassembled.
Read less
Was this instruction helpful to you?
Thank you for voting!