Models > 21A-410A352

21A-410A352 (1999) Yard Machines Tiller

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 21A-410A352

Viewing 3 of 3
Drive Assembly Diagram and Parts List for 1999 Yard Machines Tiller
Drive Assembly
Gear Case Diagram and Parts List for 1999 Yard Machines Tiller
Gear Case
General Assembly Diagram and Parts List for 1999 Yard Machines Tiller
General Assembly
Keep searches simple, eg. "belt" or "pump".
Washer-Thrust – Part Number: 736-0351
$6.51
In Stock
Order now and your part arrives by May 28
Lock Nut – Part Number: 712-3004A
$6.51
On Order
DISCONTINUED – Part Number: 714-0149B
$6.51
Special Order
Lawn Mower Grease Benalene (8 Oz) – Part Number: 737-0300A
$50.30
This 8-oz multi-purpose grease is an OEM replacement lubricant formulated for use in gear cases, transmissions, and chain cases on outdoor power equipment. It helps reduce friction and wear in high-lo...
In Stock
Order now and your part arrives by May 28
Tiller Clutch Cable – Part Number: 946-0916
$77.32
In Stock
Order now and your part arrives by May 28
Screw-1/4-20 X .62 – Part Number: 710-0751
$6.51
In Stock
Order now and your part arrives by May 28
Belt-v – Part Number: 954-0438
$64.80
This is a genuine replacement part sourced from the original manufacturer for use with tillers. The special v-belt is commonly used to engage the tiller tines. Over time belts can wear stretch or dete...
In Stock
Order now and your part arrives by May 28
Key-special – Part Number: 918-0237
This is an authentic replacement part, sourced from the original manufacturer for use with rear tine tillers. The metal clutch key fits into the slots on the drive shaft and is used to align with the ...
No Longer Available
Cap Speed Nut – Part Number: 726-0106
$6.51
In Stock
Order now and your part arrives by May 28
Tine Assy-lh – Part Number: 642-0015-0637
$188.07
In Stock
Order now and your part arrives by May 28
Tine Assy-rh – Part Number: 642-0016-0637
$188.07
Special Order
Nut-shld – Part Number: 738-0876A
$17.39
In Stock
Order now and your part arrives by May 28
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
LISA M from BATESVILLE, AR
Parts Used:
737-0300A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
Read less
6 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More