Models > 511975

511975 Troy-Bilt Tiller

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
$4.99
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Oil Seal-Wheel Shaft – Part Number: 921-04031
$10.48
In Stock
Washer-Lock 5/16 – Part Number: 936-0119
$4.99
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Hex Nut 5/16-18 – Part Number: 712-3010
$4.99
In Stock
Gasket-Tiller Housing Cover, .010" Thick – Part Number: GW-1129-1099
No Longer Available
Gasket-Front Bearing Cap – Part Number: GW-1124-2099
No Longer Available
Forward Idler Pulley – Part Number: 756-04170
No Longer Available
Wire Tie – Part Number: 725-0157
$3.99
In Stock
Clevis Pin – Part Number: 711-04126
No Longer Available
Hair Pin Cotter – Part Number: 714-04048
$7.70
On Order
RING-HEAVY EXT .984 ID – Part Number: 716-04104
No Longer Available
Lock Washer – Part Number: 716-0101
$3.99
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Gary from ELGIN, OK
Parts Used:
756-04170
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Bearing seized
Pull belt cover, 2 nuts
Remove tensioner, 1 nut
Slide old tensioner off and replace
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More