Models
>
D24000
D24000 (Type 2) DeWALT Tile Saw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for D24000
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
$7.01
This OEM brush is sold individually, however two are needed in most power tools, and should be replaced at the same time, even if only one is worn. If the motor of your power tool is running poorly, w...
In Stock
In Stock
In Stock
On Order
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jose
March 20, 2022
My wet saw makes a big noice in the motor
For model number D24000
Hello Jose, Thank you for your inquiry. The most likely cause of this are the motor brushes or armature bearings. The bearings are only available as part of the armature assembly, but you could have an issue with the armature itself as well. Check the bearings and brushes for extensive wear and tear. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Steve
November 16, 2022
10 inch DeWALT wet tile saw doesn't cut square anymore table wobbles now.Will new rollers fix?
For model number D24000
Hello Steve, thank you for asking. According to our research, this issue could be caused by a dislocated rail, rollers, or worn-out blade. We would recommend checking the following parts to fix your issue: rail, part number FIX11927823, rail, part number FIX11927820, roller, part number FIX11928042, and blade, part number FIX11929133. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
