Models > AFNE9BSP115TN13

AFNE9BSP115TN13 Speed Queen Washer

Jump to:

Find Part by Name

Diagrams for AFNE9BSP115TN13

Viewing 15 of 15

Base/Side And Rear Panels

Cabinet Top/Control Panel/Controls

Dispenser Assembly

Drain Hose/Pump

Front Panel Assembly

Front Panel/Door Assembly/Door Seal

Inner Basket/Trunnion/Bearing Housing/Pulley

Labels

Mixing Valve And Dispenser Hose

Motor/Belt

Outer Tub/Front And Clamp Ring

Shipping Materials

Special Tools

Wire Harnesses/Wires

Wire Ties/Harness Clips/Lead-In Cord

Most Popular Parts for AFNE9BSP115TN13

Viewing 12 of 221

Inlet Hose Washer

$8.00

This high pressure inlet hose washer is black. It is an inch in diameter, made of rubber, and used with many washing machines, refrigerators, and dishwashers.

Order within the next 9 hrs and your part ships today!

Rubber Foot Pad

This pad is used for the levelling legs of many washing machines.

Screw - 6-32 x 5/16

$5.36

This screw is well under an inch long, and is made of metal.

Single Washer Inlet Strainer

$11.06

Found at the end of the inlet hoses.

Order within the next 9 hrs and your part ships today!

Screw, Ground

$5.36

Order within the next 9 hrs and your part ships today!

Lock Nut

$5.36

Sold individually.

Order within the next 9 hrs and your part ships today!

Nut

$14.09

This is a genuine OEM replacement part. This nut is used in a number of appliances. Most often it can be found in the assembly of ranges, air conditioners, cook tops, washers, microwave oven combos, r...

Retainer

Industrial Sealant

Red 3M800

Grommet

CLIP- RETA

Baffle Plate and Seal

$61.17

This baffle plate and seal gasket deflects water and keeps it from seeping out of the bottom of your D&M design dishwasher. It fits models with a door measuring 21-3/4 inches wide. Use it for your Fri...

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for AFNE9BSP115TN13

Viewing 1 of 1

Leaking

Fixed by these parts

How to fix it

Installation Instructions for AFNE9BSP115TN13 Provided by Fix customers like you

Viewing 1 of 1

Customer:: DAVID from SANDY HOOK, CT
Parts Used:: WP22002960
Difficulty Level:: Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Socket set, Wrench set

Bad tube seals and bearings

Disassembled washer as per directions with seal kit. Removed inner tub. Cut both tub shaft bearing in half; punched out from outter tub. Installed new bearings using .5 inch threaded rod, washer and bolts. Installed new seal on inner tub shaft. Installed inner tube. Re-assembled washer.

1 of 7 people found this instruction helpful.

Was this instruction helpful to you?