Models > 31AS62N2711

31AS62N2711 (2012) Troy-Bilt Snow Blower

Jump to:

Find Part by Name

Diagrams for 31AS62N2711

Viewing 14 of 14

Auger and Auger Housing

Flywheel and Blower Housing

Fuel Tank and Mounting

Most Popular Parts for 31AS62N2711

Viewing 12 of 381

Shear Pin, .25

$4.99

Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference ...

Bow Tie Cotter Pin

$4.99

This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...

Carriage Bolt, 5/16-18 x .75

$3.78

This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the b...

Nut, Flange Lock, 5/16-18, Grf

$3.83

This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...

Slide Shoe

$22.60

This slide or skid shoe fits snow blowers and is attached to the auger housing. The shoe slides around the ground to ensure the snow blower glides and moves easily. It also elevates the auger housing ...

Nut, Flange Lock, 3/8-16, Grf

$3.95

This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...

Hex Flange Nut 5/8-18 Thd.

$6.96

This part includes one hex flange nut that is compatible with various outdoor equipment. It has a thread of 5/8-18 and consists of a hex nut with a wide flange on one end. The flange works like a wash...

TT Screw 1/4-20 x 0.5

$4.14

This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...

Plastic Bushing .380 ID

$4.01

This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventua...

Self-Tapping Screw, 5/16-18, .750

★★★★★

(1)

$3.42

This is a self-tapping screw for your lawn equipment. It has multiple applications, and is made of durable metal. This part is sold individually. To install this screw, you will need a wrench. The maj...

Nut, Flange Lock, 1/4-20, Grf

$3.90

This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...

V-Belt

$29.29

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer:: Jason from PEABODY, MA
Parts Used:: 751P11897B
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours

Carburetor rebuild

I can’t complete this easy repair because partselect sent the wrong part and has not responded to customer service requests. Please contact me- jtandree@gmail.com

1 person found this instruction helpful.

Was this instruction helpful to you?

31AS62N2711 (2012) Troy-Bilt Snow Blower

Find Part by Name

Diagrams for 31AS62N2711

Most Popular Parts for 31AS62N2711

Questions and Answers

Videos for 31AS62N2711

Replacing the V-Belt

Replacing the Throttle Linkage Spring

Installation Instructions for 31AS62N2711 Provided by Fix customers like you