Models
>
31AH95P6711
31AH95P6711 (2013) Troy-Bilt Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.51
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Order now and your part arrives by Apr 6
$7.73
This is an authentic Milwaukee replacement part manufactured for use with hammer drills and driver drills. The motor assembly is a complete assembly including the pinion, bearings, and housing. This m...
In Stock
Order now and your part arrives by Apr 6
On Order
$6.66
This is an authentic OEM part from Yard Machines for use with Snow Blowers, Engine, Tillers, Lawn Mowers, Log Splitters, Chipper Shredders and Lawn Tractors. The carburetor float bowl gasket seals th...
On Order
Special Order
In Stock
Order now and your part arrives by Apr 6
$6.96
This is an authentic replacement part manufactured for use with Ryobi snowthrowers. The grease plug is commonly used to seal the oil port on the auger\\\'s gearcase assembly. This grease plug is avail...
In Stock
Order now and your part arrives by Apr 6
$29.66
This is an OEM part sourced directly from the manufacturer. The V-belt is commonly found in Troy-Bilt snowblowers. This part is made of flexible rubber, and is used in conjunction with the pulley sy...
On Order
On Order
Special Order
$6.51
This is a genuine component which is supplied by the original equipment manufacturer for use with Yard Machines, MTD and Ryobi lawn and garden equipment. It is a standard hardware which may have multi...
Special Order
$27.16
This is an OEM replacement part for Troy-Bilt self-propelled lawn mowers. The V belt connects the engine pulley to the transmission pulley, to propel the mower forward. This part is made of rubber and...
In Stock
Order now and your part arrives by Apr 6
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jeffrey from MASSAPEQUA, NY
- Parts Used:
- 731-06113
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
Broken Steering Trigger on right side
If the trigger is broken on the left side, it is really easy to replace, if broken on the right side like mine the snow chute joystick control is in the way. Just remove the cover under the joystick and then the large nut under the joystick then you will be to push the joystick down giving you access to the pin that holds the steering tri
... Read more
gger.
Read less
Was this instruction helpful to you?
Thank you for voting!