BH3203E Snapper Snow Blower - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from FAIRMONT, WV
- Parts Used:
- 7014915YP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Blower chute kept falling off
Ordered the plastic chute retainer parts. 3 required. Remove screws from chute to retainer 6 total. Replace chute and hold retainer clip under chute and replace screws. Do not over tighten only made of plastic. Make sure to spray some wd 40 on rim so it moves smoothly. If it doesnt loosen screws a little. Works perfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from ULYSSES, KS
- Parts Used:
- 7028427YP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Installed new scrapper blade
Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks
Was this instruction helpful to you?
Thank you for voting!