Models
>
BH3200
BH3200 Snapper Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for BH3200
Viewing 7 of 7_WW_1.gif "Collector Housing Belts Pulleys Auger Diagram and Parts List for Snapper Snow Blower")
_WW_2.gif "Control Panel Lower Handle Diagram and Parts List for Snapper Snow Blower")
_WW_4.gif "Discharge Chute Diagram and Parts List for Snapper Snow Blower")
_WW_5.gif "Engines Covers Diagram and Parts List for Snapper Snow Blower")
_WW_6.gif "Handles Blade Control Diagram and Parts List for Snapper Snow Blower")
_WW_7.gif "Tecumseh Starter Assembly Diagram and Parts List for Snapper Snow Blower")
Keep searches simple, eg. "belt" or "pump".
$5.99
This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on appliance. It is made from metal and measures to 5/16 inches for the diameter and a...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
$4.99
This is a washer for various lawn and garden equipment. It is a flat washer and requires a 5/16-inch bolt size. Washers are positioned under the head of a nut or bolt to strengthen the connection of two or more parts.
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from FAIRMONT, WV
- Parts Used:
- 7014915YP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Blower chute kept falling off
Ordered the plastic chute retainer parts. 3 required. Remove screws from chute to retainer 6 total. Replace chute and hold retainer clip under chute and replace screws. Do not over tighten only made of plastic. Make sure to spray some wd 40 on rim so it moves smoothly. If it doesnt loosen screws a little. Works perfect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from ULYSSES, KS
- Parts Used:
- 7028427YP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Installed new scrapper blade
Unbolt old one with 4 screws and nuts and replaced new blade with new screws . Very easy fix with new blade and screws . Thanks
Was this instruction helpful to you?
Thank you for voting!
Old auger broke
From the parts visual
Was this instruction helpful to you?
Thank you for voting!