Models
>
1022EX
1022EX ((1697340-00)(2020)) Snapper Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$145.39
If your snowblower isn?t clearing snow like it used to, this scraper and flights kit can help. It includes a metal scraper to protect the bottom and plastic flights that help throw snow out of the chu...
On Order
$6.66
This hex nut is created for use on lawn and gardening equipment. This is a multi-application nut that depends on the unit and tool you are using. For installation instructions, check the manual provid...
In Stock
Order now and your part arrives by Mar 27
$6.51
A genuine item which is supplied directly from the original equipment manufacturer for use with Murray and Snapper lawn and garden equipment. It is a standard hardware which has multiple applications ...
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
Special Order
On Order
In Stock
Order now and your part arrives by Mar 27
In Stock
Order now and your part arrives by Mar 27
On Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 1022EX
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Duane from RICHFIELD, MN
- Parts Used:
- 1687806
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Scraper bar and flight worn past wear limit.
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl
... Read more
ied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from BOUNTIFUL, UT
- Parts Used:
- 1687806
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
wetn wele except having to go get a star driver to get old one off.. treplacmetn parts werre all allen wrench so went well
Star wrenched off old blades.. removed scraper with Allen's and adjustable wrench. replaced scraper first then attached the blades and tightened.. Whalla.. done ready for another foot or snow removal same day.
Was this instruction helpful to you?
Thank you for voting!