Models > E2914000

E2914000 Murray Snow Blower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for E2914000

Viewing 13 of 13
Control_Panel_Assembly Diagram and Parts List for Murray Snow Blower
Control_Panel_Assembly
Decal_Assembly Diagram and Parts List for Murray Snow Blower
Decal_Assembly
Drive_Components_Repair_Parts Diagram and Parts List for Murray Snow Blower
Drive_Components_Repair_Parts
Electric_Starter_Assembly Diagram and Parts List for Murray Snow Blower
Electric_Starter_Assembly
Frame_Components_Repair_Parts Diagram and Parts List for Murray Snow Blower
Frame_Components_Repair_Parts
Gear_Case_Repair_Parts Diagram and Parts List for Murray Snow Blower
Gear_Case_Repair_Parts
Handle_Repair_Parts Diagram and Parts List for Murray Snow Blower
Handle_Repair_Parts
Motor_And_Drive_Repair_Parts Diagram and Parts List for Murray Snow Blower
Motor_And_Drive_Repair_Parts
Page Diagram and Parts List for Murray Snow Blower
Page
Page Diagram and Parts List for Murray Snow Blower
Page
Page Diagram and Parts List for Murray Snow Blower
Page
Page Diagram and Parts List for Murray Snow Blower
Page
Single_Hand_Control_Assembly Diagram and Parts List for Murray Snow Blower
Single_Hand_Control_Assembly
Keep searches simple, eg. "belt" or "pump".
Snow Blower Drive Belt – Part Number: 1733324SM
$26.72
This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. Th...
On Order
Bearing, Ball 11/16x1 – Part Number: 1705897SM
$10.83
This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distribut...
In Stock
Order now and your part arrives by May 11
Snow Blower Belt – Part Number: 585416MA
$31.84
This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive be...
In Stock
Order now and your part arrives by May 11
Wheel,friction 4.3 Ru – Part Number: 1501435MA
$35.03
This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for r...
In Stock
Order now and your part arrives by May 11
Snow Blower Screw 1/4-20x1.75 – Part Number: 703057
$9.02
This is a genuine OEM sourced replacement hardware designed for use with snowblowers. Shear bolts are installed in order to protect your unit. If the auger gets jammed or clogged, shear bolt is design...
In Stock
Order now and your part arrives by May 11
Spacer, Sleeve – Part Number: 703058
$11.12
The shear pin spacer sleeve goes between the auger and the snowblower screw. This part is priced individually. This is an authentic Craftsman replacement part that is sourced from the original manufac...
In Stock
Order now and your part arrives by May 11
Lawn Mower Cotter Pin – Part Number: 703312
$6.51
It is a standard hardware which may have multiple applications. This is a genuine OEM sourced cotter pin designed for use with Murray, Simplicity, and Snapper lawn tractors. It is an identical replace...
In Stock
Order now and your part arrives by May 11
Snow Blower Bearing And Retainer Assembly – Part Number: 334163MA
It is an authentic OEM part which is specially designed for Murray, Snapper and Simplicity snowblowers. This bearing secures and stabilizes moving parts to ensure proper rotation angle and position. U...
No Longer Available
Spring, Idler Tractio – Part Number: 53704MA
$12.83
This is a genuine replacement part sourced from the original manufacturer for use with dual snow throwers made by Murray, Snapper and Simplicity. This part gives tension between the idler pulley brack...
In Stock
Order now and your part arrives by May 11
Ring, Retainer – Part Number: 1657528SM
$6.51
This genuine item is supplied by the original equipment manufacturer for use with Murray, Simplicity and Snapper lawn mowers. It is the special retaining ring for the wheel. If the hardware is missing...
In Stock
Order now and your part arrives by May 11
Pulley, Idler – Part Number: 1502120MA
This is a genuine manufacturer-approved component which is specially made for use with Murray and Snapper snowthrowers. The purpose of this pulley is to apply tension to the belt. It provides an ident...
No Longer Available
Nut, 3/8-16 – Part Number: 703333
$7.21
This is a genuine manufacturer-sourced component which is specially designed for use with Murray riding lawn mowers and garden tractors. It is a standard hardware which may have multiple applications....
In Stock
Order now and your part arrives by May 11
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for E2914000

Viewing 3 of 3
Drive system does not work
Fixed by these parts
Fixing Fixing
How to fix it
Auger will not turn
Fixed by these parts
Fixing
How to fix it
Will not blow snow
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Kenneth from ALDAN, PA
Parts Used:
1501435MA, 585416MA, 1733324SM
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench set
Refurbishing for next winter season
I replaced the auger belt and drive belt by separating the machine. The auger belt alone can be replaced by simply tilting without separating but the drive belt can not. So after separating the machine, I removed the auger belt by loosening the belt guide and removing the tensioner. I then loosened the nut that secures the drive wheel. This gave me enough play to remove the drive belt from the drive tensioner and then wiggle it from the drive wheel and out of the machine. Install by wiggling the belt back behind the drive wheel until you can slip it on the wheel. pull tensioner pulley out of the way to get the belt on the top pulley. Tighten the nut to secure the drive wheel. Reconnect the machine at the bottom of the auger housing and replace the auger belt, tensioner, and belt guide. Complete by replacing the upper bolts that hold the two parts together. I have not replaced the friction wheel as of yet. My process took 30 - 45 minutes for both belts.
Read less
8 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More