1695539 (2008) Murray Snow Blower

This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. Th...

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distribut...

This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for r...

This nut is mostly used in lawn tractors and snow blowers and is in different locations in the machine, depending on snowblower. It is made from metal and measures to 5/16 inches for the diameter and ...

This is a genuine OEM sourced replacement hardware designed for use with snowblowers. Shear bolts are installed in order to protect your unit. If the auger gets jammed or clogged, shear bolt is design...

This is an original replacement part manufactured for use with Craftsman snow throwers. The special bolt is used to secure the auger blade to the axle. The bolt is used as a safeguard if the blade get...

This is a hair pin clip for your lawn equipment. You may also know it as a cotter pin. It is a multi-application part, depending on your unit, as well as the make and model. To correctly install the p...

The shear pin spacer sleeve goes between the auger and the snowblower screw. This part is priced individually. This is an authentic Craftsman replacement part that is sourced from the original manufac...

This is available as an individual replacement part. The auger bearing connects to the auger plate and is made of plastic. If this part becomes broken it will need to be replaced and may require a scr...

This is an authentic OEM sourced replacement component which is specially made for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make ...

This part is an OEM from Craftsman for use with Snow Blowers. The extension spring is used to provide tension between the link rods, and disconnect arm which slows the riding lawnmower down when the s...

It is an authentic OEM part which is specially designed for Murray, Snapper and Simplicity snowblowers. This bearing secures and stabilizes moving parts to ensure proper rotation angle and position. U...