Models
>
1022E
1022E ((1696720-01)(2020)) Murray Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$145.39
If your snowblower isn?t clearing snow like it used to, this scraper and flights kit can help. It includes a metal scraper to protect the bottom and plastic flights that help throw snow out of the chu...
On Order
In Stock
Order now and your part arrives by Mar 28
$40.99
This is an original part from Snapper for use with Snow Blowers. The most common reason for replacing the chute handle is if it is broken. This part is sold individually. There are no tools needed to replace this part.
On Order
In Stock
Order now and your part arrives by Mar 28
In Stock
Order now and your part arrives by Mar 28
Special Order
On Order
In Stock
Order now and your part arrives by Mar 28
In Stock
Order now and your part arrives by Mar 28
In Stock
Order now and your part arrives by Mar 28
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 1022E
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Duane from RICHFIELD, MN
- Parts Used:
- 1687806
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Scraper bar and flight worn past wear limit.
Removed scraper bar and support. Removed flight paddles. Several retaining screws were seized requiring WD-40 and vice grips for removal. Torx sockets stripped out due to threads being seized. Hex head cap screws would be better for both scraper bar and flight papples.once the screws were removed I used a tap to clean the threads and appl
... Read more
ied lubricant to minimize future corrosion. Three of the four lock nuts for the scraper bar were either not included or lost in shipping due to poor packing requiring me to purchase replacements.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Overall, the job took longer than it should have due to the additional time required to remove seized screws and acquire replacement lock nuts.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from BOUNTIFUL, UT
- Parts Used:
- 1687806
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
wetn wele except having to go get a star driver to get old one off.. treplacmetn parts werre all allen wrench so went well
Star wrenched off old blades.. removed scraper with Allen's and adjustable wrench. replaced scraper first then attached the blades and tightened.. Whalla.. done ready for another foot or snow removal same day.
Was this instruction helpful to you?
Thank you for voting!