Models
>
11530PC
11530PC (2012) MTD Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.25
Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference ...
In Stock
Order now and your part arrives by Mar 26
$6.25
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...
In Stock
Order now and your part arrives by Mar 26
$6.25
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Order now and your part arrives by Mar 26
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Mar 26
$29.36
This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or ...
On Order
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Mar 26
$6.25
This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventua...
In Stock
Order now and your part arrives by Mar 26
This is a self-tapping screw for your lawn equipment. It has multiple applications, and is made of durable metal. This part is sold individually. To install this screw, you will need a wrench. The maj...
In Stock
Order now and your part arrives by Mar 26
$6.25
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
Order now and your part arrives by Mar 26
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners man...
In Stock
Order now and your part arrives by Mar 26
$8.35
This is a genuine manufacturer approved replacement spark plug. It is an authentic OEM part commonly used on a variety of lawn and garden equipment. The purpose of a spark plug is to deliver electrici...
In Stock
Order now and your part arrives by Mar 26
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 11530PC
Viewing 3 of 3Drive system does not work
Fixed by these parts
How to fix it
Auger will not turn
Fixed by these parts
How to fix it
Auger / blower won't engage
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARRISVILLE, NH
- Parts Used:
- 790-00121-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from FRANKLIN, MA
- Parts Used:
- 790-00118-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
badly worn shave plate
unbolt plate and swap over new plate
Was this instruction helpful to you?
Thank you for voting!