Models
>
75903
75903 ((317E640F033)(1997)) MTD Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the b...
In Stock
Order now and your part arrives by Jul 23
This replacement shear bolt is supplied directly from the original equipment manufacturer for use with Craftsman snowblowers. The purpose of this hardware is to protect your snowblower. If the auger g...
In Stock
Order now and your part arrives by Jul 23
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Order now and your part arrives by Jul 23
$6.51
This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventua...
In Stock
Order now and your part arrives by Jul 23
$6.55
This authentic manufacturer-supplied part is designed for Craftsman snowblowers. Flange bushings are used to provide support for components while allowing them to rotate with minimum friction. It is m...
In Stock
Order now and your part arrives by Jul 23
This is an authentic OEM sourced part which is specially manufactured for use with walk-behind snow throwers. The shave plate is used to scrape up the snow, please make sure to refer to the owners man...
In Stock
Order now and your part arrives by Jul 23
This is a Genuine OEM replacement Belt set designed for use with Snowblower. This part is made out of Rubber and it includes one belt. This belt drives your unit. Make sure to clean pulleys before i...
In Stock
Order now and your part arrives by Jul 23
In Stock
Order now and your part arrives by Jul 23
In Stock
Order now and your part arrives by Jul 23
$20.05
This item has been sourced from the original manufacturer to be used with snowblowers from MTD, Ryobi, Yard Machines, Bolens, and Yard-Man. This item is the hard rubber tire that fits onto the frictio...
In Stock
Order now and your part arrives by Jul 23
$36.90
This is an authentic OEM sourced replacement part designed for use with snow throwers/blowers. It allows you to engage and disengage the unit. This cable is sold individually. You may need pliers to ...
In Stock
Order now and your part arrives by Jul 23
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Order now and your part arrives by Jul 23
Common Problems and Symptoms for 75903
Viewing 2 of 2Auger will not turn
Fixed by these parts
How to fix it
Drive system does not work
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARRISVILLE, NH
- Parts Used:
- 790-00121-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from FRANKLIN, MA
- Parts Used:
- 790-00118-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
badly worn shave plate
unbolt plate and swap over new plate
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LISA M from BATESVILLE, AR
- Parts Used:
- 737-0300A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Was this instruction helpful to you?
Thank you for voting!