Models > 31AE633E101

31AE633E101 Cub Cadet Snow Blower

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Slide Shoe – Part Number: 784-5580-0637
$23.05
This slide or skid shoe fits snow blowers and is attached to the auger housing. The shoe slides around the ground to ensure the snow blower glides and moves easily. It also elevates the auger housing ...
In Stock
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
$4.99
This is a TT screw, but it is also called a fastener, and it is used on multiple outdoor tools. This part is a Tri-Round or Tri-Lobular thread forming screw, it is 0.25 inches in diameter, 0.5 inches ...
In Stock
Plastic Bushing .380 ID – Part Number: 941-0475
$4.99
This is a plastic bushing for your lawn equipment. It fits onto the side of your fuel tank, and holds the fuel fittings so they do not touch sharp metal. This part is made of plastic, and will eventua...
In Stock
Worm Gear 20 T, 22" – Part Number: 917-04861
$41.34
In Stock
Hex Flange Bearing – Part Number: 941-0245
$9.91
In Stock
Wheel-Friction 4. – Part Number: 935-0243B
$18.74
In Stock
Drive Clutch Cable 39.88 – Part Number: 946-0898
$26.74
In Stock
Washer-Lock 5/16 – Part Number: 936-0119
$4.99
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Auger Clutch Cable – Part Number: 946-0897
$25.23
In Stock
Star Knob 5/16-18 – Part Number: 720-04072A
$6.64
This star knob specifically fits a variety of lawn mowers and is used to secure both the lower and upper handles of your lawn mower. If your knob is worn out or loose, then replacing it will solve you...
In Stock
Spring-Extension – Part Number: 932-0264
$4.99
In Stock
Spring-Extension – Part Number: 932-0611
$7.56
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
LISA M from BATESVILLE, AR
Parts Used:
737-0300A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
Read less
5 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More