Models
>
10530
10530 Snow Blower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for 10530
Click on the best match to narrow your results.
- 10530 (2005) Troy-Bilt Snow Blower (Polar Blast 10.5HP 30" Self-Propelled)
- 10530 (2004) Troy-Bilt Snow Blower (Polar Blast 10.5HP 30" Self-Propelled)
- 10530 (2003) Troy-Bilt Snow Blower (Polar Blast 10.5HP 30" Self-Propelled)
- 10530 (SBE 96195000103 -2006-08) Husqvarna Snow Blower (Snowblower)
- 10530 (SBE 96195000102 -2006-07) Husqvarna Snow Blower (Snowblower)
- 10530 (SBE 96195000101 -2006-06) Husqvarna Snow Blower (Snowblower)
- 10530 (SBE 96195000100 -2006-06) Husqvarna Snow Blower (Snowblower)
- 10530 (SBE 96193002000 -2006-08) Husqvarna Snow Blower (Snowblower)
- 10530 (SBE 96193000401 -2006-05) Husqvarna Snow Blower (Snowblower)
- 10530 (SBE 96193000400 -2006-05) Husqvarna Snow Blower (Snowblower)
- 10530 (SBEB 96193001300 -2006-06) Husqvarna Snow Blower (Snowblower)
- 105308E (1694995) Snapper Snow Blower (30" 10.5 Hp Two Stage Large Frame Snow Thrower Series 8)
- 10530CA MTD Snow Blower (MTD Snowblower Model 10530CA Parts)
- 10530SBE (2006-08) Husqvarna Snow Blower (Husqvarna Snowblower Model 10530SBE/2006-08 (10530SBE/200608, 10530SBE/2006 08) Parts)
- 10530SBE (2006-05) Husqvarna Snow Blower (Husqvarna Snowblower Model 10530SBE/2006-05 (10530SBE/200605, 10530SBE/2006 05) Parts)
- 10530SBE (2006-06) Husqvarna Snow Blower (Husqvarna Snowblower Model 10530SBE/2006-06 (10530SBE/200606, 10530SBE/2006 06) Parts)
- 10530SBE (2006-07) Husqvarna Snow Blower (Husqvarna Snowblower Model 10530SBE/2006-07 (10530SBE/200607, 10530SBE/2006 07) Parts)
- 10530SBEB Husqvarna Snow Blower (Husqvarna Snowblower Model 10530SBEB Parts)
Exact Part matches for your search term
Viewing 4 of 4
Special Order
Keep searches simple, eg. "belt" or "pump".
$6.51
Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference ...
In Stock
Order now and your part arrives by Apr 27
$6.51
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...
In Stock
Order now and your part arrives by Apr 27
This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the b...
In Stock
Order now and your part arrives by Apr 27
$6.51
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Order now and your part arrives by Apr 27
In Stock
Order now and your part arrives by Apr 27
$6.51
Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed t...
In Stock
Order now and your part arrives by Apr 27
$37.57
This slide or skid shoe fits snow blowers and is attached to the auger housing. The shoe slides around the ground to ensure the snow blower glides and moves easily. It also elevates the auger housing ...
In Stock
Order now and your part arrives by Apr 27
$6.51
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
In Stock
Order now and your part arrives by Apr 27
This is an OEM part sourced directly from Husqvarna. This grade 8 hex head screw is made of metal and measures approximately 3/8 - 24 x 1 ? 3/8. This screw is commonly used in lawn mowers, snow blower...
In Stock
Order now and your part arrives by Apr 27
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Apr 27
$26.72
This is a notched traction drive belt for a snowblower, sold individually. It is also sometimes referred to as a ground drive belt. It measures approximately 3/8-inches wide and 33-1/6-inches long. Th...
On Order
$30.57
This is a genuine replacement clutch cable sourced from the original equipment manufacturer, designed for use with MTD and Yard Man snowblowers. It serves as an identical replacement for a missing or ...
On Order
Common Problems and Symptoms for 10530
Viewing 3 of 3Drive system does not work
Fixed by these parts
How to fix it
Auger will not turn
Fixed by these parts
How to fix it
Auger / blower won't engage
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from HARRISVILLE, NH
- Parts Used:
- 790-00121-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Original shave plate badly worn
With WD-40 or equivalent, spray the four nuts on the underside of the snow blower housing that hold the shave plate to the housing. Also spray the two bolts that hold the shave plate to the side of the housing. Let sit for a few minutes and using a 1/2" box end wrench remove the four nuts on the bottom of the housing. If necessary, app
... Read more
ly heat with a torch to loosen. Using a 9/16" box end wrench, remove the nuts on the sides (these also hold the adjustable skid feet). It is recommended that the bottom bolts and nuts be replaced with 5/16-18 X 3/4" long zinc plated carriage bolts using zinc plated washers and ny-lock nuts. It is also recommended that all of th screw threads be coated with an anti- seize lubricant so disassembly at a later date will be easy.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from FRANKLIN, MA
- Parts Used:
- 790-00118-0637
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
badly worn shave plate
unbolt plate and swap over new plate
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jason from Cummington, MA
- Parts Used:
- 585056901
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Chunk of wood broke the lower plastic chute.
Removed belt cover. Unbolted upper chute mount and removed metal upper chute with cables still attached. Replaced plastic lower chute, 4 bolts and reassembled machine.
Was this instruction helpful to you?
Thank you for voting!