Models
>
WA476DSHASU
WA476DSHASU ((A1)) Samsung Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$181.80
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WA476DSHASU
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- SCOTT from VERNAL, UT
- Parts Used:
- DC31-00054A
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Code indicating washer was NOT discharging water
Watched the video, procedure was simple and as depicted on the video. Started by using a wet shop Vac to the discharge hose and sucked as much dirty wash water out as possible. Removed the pump,and found the motor did not turn freely. Removed the motor (3 screws) and replaced the motor with new part. Reassembled the washer, everything wor
... Read more
ked as it should. After about 3-4 loads of laundry, the "Not Draining" code / problem returned. Again, sucked out the water with the Shop Vac. Checked the Filter /Cleanout and found it completely packed with MUD. Cleaned that out, and again disassembled the washer. The pump was removed and the remaining muddy gunk was cleaned from the impeller. The 3 drain lines that attached to the pump were inspected for blockage/obstruction and flushed of any muddy residue. Reassembly was quick and easy, and the washer has worked well since. I have no idea how the dirt got into the system with enough dirt to gunk up the system. Recommend keeping more frequent inspections of the cleanout trap.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Josh from UNION, MO
- Parts Used:
- DC60-50003A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
The nut (referred to as spin nut or hexagon nut) which holds the tub to the motor broke into multiple pieces.
NOTE: this repair requires OEM part number DC60-50003A and what was originally provided was 6021-001573. This is important as Part Select has this mixed in their Database and I made them aware.
Otherwise once you have the correct part the repair is simple. Open the top of the washer and remove the pulsator cap, there is a 10m ... Read more m bolt which is removed next, the pulsator pan (believe this is correct) can be removed with a flat head screw driver. Do so by placing the screw driver in one of the groves by where the bolt was. Once this is removed that is where this part will be. I didn’t have to remove since mine was in pieces but it comes off/goes on counter clockwise. Repeat steps to put everything back together.
Otherwise once you have the correct part the repair is simple. Open the top of the washer and remove the pulsator cap, there is a 10m ... Read more m bolt which is removed next, the pulsator pan (believe this is correct) can be removed with a flat head screw driver. Do so by placing the screw driver in one of the groves by where the bolt was. Once this is removed that is where this part will be. I didn’t have to remove since mine was in pieces but it comes off/goes on counter clockwise. Repeat steps to put everything back together.
Read less
Was this instruction helpful to you?
Thank you for voting!