This ice tray or ice bin assembly is a genuine OEM replacement part designed for your Samsung refrigerator. The assembly is made of white plastic and has dimensions of 21 inches by 13.25 inches. It is...
This door closing mechanism is designed to ensure smooth and secure closure of select Samsung refrigerator models. By helping to maintain a tight seal, it supports consistent internal temperatures and...
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
16 days ago
my fridge only make three types of ice the bite size no work.you can push the reset switch the ice tray will rotate and act liking dumping ice but no ice present . observed no water filling up tray but on the other side its making ice cubes. what could be wrong? is it a easy dyi fix?
For model number rf32cg5400sraa
Hello Robert, thank you for the question. When one side of a dual ice maker works and the other does not, it usually means the non-working side has a frozen fill tube, a blocked water filter, or a faulty water valve. Remove the Ice Bites ice bucket. Use a warm, damp cloth or a hair dryer on a low setting to gently melt any ice blocking the fill tube. Do not pull or push the ejector arm forcefully, as this damages the internal motor or coils. Remove your water filter. If ice production resumes or the tray begins filling, the filter is clogged and needs to be replaced. The part number is FIX17537652. We hope this is what you were looking for!
Replaced parts, as ordered - very simple. Watched the video before hand. Found that existing assembly did not have the "Y" clip installed. Been making ice for three weeks with no freezing up (yet) - time will tell.
After watching a few you tube videos on the Samsung ice maker removal, this repair was not that bad. The key to this repair is PATIENCE! Unplug your fridge, have a steamer and Phillips & straight screw driver handy. Remove ice bucket, place rags or paper towels in bottom half of ice maker. Fire up your steamer and melt ALL ice befor
... Read moree proceeding! Once all ice is gone, remove one screw to the left on cover for the wiring, remove plastic wire cover , remove screw just below ice maker itself, push locking tab in to release plastic lower tray attached to bottom of ice maker. Once you do this it exposes the refrigerant line (u shaped) under ice maker. If you can still see ice once that plastic cover drops down, yep... more steaming , if you try chip away any remaining ice damage will result to that refrigerant line then it’s game over. Fridge needs to be replaced! Once fully clear of ice , carefully pry that refrigerant line down a bit so it is released from the bottom of ice maker. Do not bend it down too far only enough so it will clear when pulling ice maker out. Un clip yellow electrical connector to ice maker and gently pull the ice maker towards you and down to fully remove. As you are pulling it out be sure refrigerant line does not get hung up. Once removed you may find more ice build up on top of auger assembly. All ice/ frost needs to be gone. Follow u shaped refrigerant line back towards the styrofoam, push one clip on each tube towards the back with the tab facing down! The plastic rectangle trim piece slides off fairly easy. This web page gives detailed pictures on what to expect, as there could be other issues in that ice compartment that need addressed! https://edmondappliancerepairokc.com/samsung-french-door-ice-maker-frosting-up/ Hope this helps, it sure made a difference in mine. The ice maker has been producing ice like never before!
OPENED THE LEFT SIDE REFRIGERATOR DOOR WHERE THE DEFECTIVE MECHANISM WAS. GOT UP ON THE FIRST STEP OF THE STEP STOOL,REMOVED THE PHILLIPS HEAD RETAINING SCREW FROM THE BROKEN PART.PUT THE NEW CLOSING MECHANISM IN PLACE AND RE-INSTALLED THE PHILLIPS HEAD SCREW. STEPPED DOWN FROM THE STEP STOOL AND SHUT THE REFRIGERATOR DOOR.
