Models
>
RM257ABRS
RM257ABRS Samsung Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Models for RM257ABRS
Click on the best match to narrow your results.
Diagrams for RM257ABRS
Viewing 12 of 0
Keep searches simple, eg. "belt" or "pump".
On Order
$144.69
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
In Stock
Order now and your part arrives by Jun 7
In Stock
Order now and your part arrives by Jun 7
In Stock
Order now and your part arrives by Jun 7
$31.05
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator...
In Stock
Order now and your part arrives by Jun 7
In Stock
Order now and your part arrives by Jun 7
On Order
In Stock
Order now and your part arrives by Jun 7
On Order
In Stock
Order now and your part arrives by Jun 7
$6.51
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
In Stock
Order now and your part arrives by Jun 7
$9.79
This roller wheel axle pin (part number DA61-01920A) is for refrigerators. Roller wheel axle pin DA61-01920A attaches the roller wheel to the roller wheel bracket. Wear work gloves to protect your han...
In Stock
Order now and your part arrives by Jun 7
Common Problems and Symptoms for RM257ABRS
Viewing 3 of 3Fridge too warm
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- theodore from PUEBLO, CO
- Parts Used:
- DA31-00146E
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
freezer was cold fridge was not
Took shelving out of freezer removed panel. Took second panel
out and removed motor. Whole repair took 45 minutes. Works perfect
out and removed motor. Whole repair took 45 minutes. Works perfect
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from BRYAN, TX
- Parts Used:
- DA67-01528F, DA67-01527F
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic Clip of Handle Broke while removing handle
Removed handles on Refrigerator and Freezer Door by forcing handles up by pushing in and lifting them up.
Unscrewed Phillips screws holding handle mounts to the handles.
Placed handle assemblies over the door mounts and slid them down to lock in place.
Unscrewed Phillips screws holding handle mounts to the handles.
Placed handle assemblies over the door mounts and slid them down to lock in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from SALISBURY, NC
- Parts Used:
- DA63-02284B
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Ice tray had cracked and broken. The water is still not filling up my ice tray.
The replacement was fairly simple. I removed the existing tray and detached the water line. Once the water line water reattached to the new tray I inserted into the ice maker.
*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
*** The problem I'm having now is the water is not filling up the tray***
Not sure what I did wrong? Any help would be greatly appreciated!!!
Was this instruction helpful to you?
Thank you for voting!