Models
>
RY141600
RY141600 Ryobi Pressure Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RY141600
Viewing 1 of 1
Keep searches simple, eg. "belt" or "pump".
$15.06
This is an OEM spray wand for a pressure washer, sold individually. The spray wand attaches to the trigger handle, and the nozzle attaches to the end of the spray wand. It has a fitting size of 1/4-in...
In Stock
Order now and your part arrives by Apr 9
This Turbo Nozzle is compatible with select Ryobi and Homelite pressure washers, to ensure this OEM replacement part fits your pressure washer, please see the "Model Cross Reference List" below. The T...
No Longer Available
$8.83
This is a genuine Ryobi replacement part. The outlet tube assembly is designed by the manufacturer for use in pressure washers. This part is made of metal and comes with a pre-installed plastic O-ri...
In Stock
Order now and your part arrives by Apr 9
$6.51
This genuine OEM quick connect nozzle is guaranteed to fit the Ryobi pressure washers listed below. This yellow chiseling nozzle has a standard fifteen (15) degree spray width. This water-only tip is ...
In Stock
Order now and your part arrives by Apr 9
$7.14
This is a genuine OEM replacement part for Homelite and Ryobi pressure washers. The switch is used to turn the machine on and off. This is a complete switch which is located inside of the motor housin...
In Stock
Order now and your part arrives by Apr 9
$20.08
This item is sold individually and is made out of plastic, rubber, and metal. The pressure switch connects to the pump and helps to control the pressure inside the tank. A set of pliers and a screwdri...
In Stock
Order now and your part arrives by Apr 9
This o-ring is an OEM direct from Ryobi. Compatible with several pressure washer models, the plastic o-ring helps to secure the pressure switch. This protective part is sold individually. A screwdrive...
No Longer Available
$2.99
This is an authentic OEM part designed to be used on the Ryobi pressure washers listed below. This very low pressure nozzle is designed to draw soap/chemical mixture from the detergent tank, and spray...
In Stock
Order now and your part arrives by Apr 9
$6.51
This is an authentic replacement part that has been sourced from the original manufacturer to be used with pressure washers from Homelite and Ryobi. The grommet fits into the lower motor housing and i...
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
$116.71
This replacement electrical cord is a genuine manufacturer-sourced component which is specially designed for use with Ryobi and Homelite pressure washers. If the cord is damaged it is important to rep...
Special Order
In Stock
Order now and your part arrives by Apr 9
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
May 1, 2023
Nozzle is leaking but can't quite figure out from where: with power off, water just comes out of the nozzle; with power on, motor pulses on/off with water pulsing out of the nozzle. When I pull the trigger, everything is normal.
For model number RY141600
Hi Tim,
Thank you for your question. If the nozzle is leaking water, check the o-rings inside of it. If they are worn or missing, this may cause the water to leak from the nozzle. Make sure that you are using the correct sized nozzle and that it is fitted correctly. If there is debris inside the nozzle it may may cause irregular spray patterns. Inspect the nozzle for debris and clean or replace it if you are unable to use it. We hope this helps!
Was this helpful?
Thank you for voting!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dianna from Lindrith, NM
- Parts Used:
- 760504007
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The switch was bad
I popped off the old switch plug in the new switch with the wires put it back together and it worked like a charm
Was this instruction helpful to you?
Thank you for voting!