Your refrigerator air filter should be replaced at least every 6 months to ensure its working as it should. This part is responsible for reducing common food odors and bacteria in the air, improving u...
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne ...
This part includes one authentically sourced 3-pin rocker switch for a refrigerator. It is responsible for turning the light on inside the fridge when the door is open. It is commonly replaced because...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This authentic OEM part is a mounting screw for the door handle on your refrigerator. If the door handle is loose or you are having issues opening or closing the door, a new mounting screw may solve t...
This clear-front door bin fits select Whirlpool bottom-freezer refrigerators and related brands. It provides stable storage for jars and bottles and installs easily without tools. Made from durable pl...
If your fridge’s ice bin is cracked, leaking, or not dispensing ice properly, this replacement ice container could be the fix. It holds and stores ice, keeping it from spilling all over your freezer. ...
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ic...
Keep your fruits and veggies fresher for longer with this easy-to-replace crisper drawer front panel. It helps seal off the drawer from the rest of the fridge, keeping out unwanted odors and debris wh...
The trivet (also referred to as a door basket) is made mostly of clear plastic, and measures 13 3/8” wide 3 5/8” tall 4 3/4 deep. The trivet attaches to the inside of the refrigerator door, and typica...
In Stock
Order now and your part arrives by Jun 6
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marla
September 18, 2023
Unplugged fridge now it won’t start and keeps making repeated musical beeps
For model number WRF736SDAM13
Hello Marla, thank you for your question. You can try this to enter Diagnostic mode: Please note, the fridge must not be in lockout mode before going into the Diagnostic mode. 1). Press SW1 and SW2 at the same time for 3 seconds. Then, depress after you hear the Chime Indicator. The display should show 01 that means the control is in step 1 of a diagnostic routine. To exit diagnostic mode, press SW1 and SW2 at the same time for 3 seconds. We hope this helps.
Was this helpful?
Thank you for voting!
Marla
September 20, 2023
Fridge not cooling well and making a loud humming noise. We replaced Freon coolant today as it was low but it hasn’t helped.
For model number WRF736SDAM13
Hello Marla, thank you for your inquiry. When the condenser coils or fan are dirty, the refrigerator has to work overtime, which can cause it to heat up and hum loudly. Make sure you clean them regularly, either twice a year or more often if you have pets who shed. Sometimes, the evaporator motor, part number FIX11755853, may also make noises due to ice buildup on the motor. If there is too much ice buildup, defrost the ice to see if it fixes the problem. We hope this helps.
The fridge staying around 55 degrees for a week and then slowly cooling back to 37 in a day. At this point, we had already mostly emptied the fridge as most things were spoiled. A technician replaced the damper control but that didn't seem to do anything.
I just bought a heater and defrost thermostat but given that it is now cooling, it feels like something else is at fault here like the control board? Maybe the warmer temps for a week essentially "manually" defrosted the unit?
Oh, and through all of this, the freezer has been holding the proper temperature or at least not obviously defrosted stuff.
Any thoughts appreciated.
For model number WRF736SDAM13
Hello Josh, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the control board, part number FIX11756600, to fix the issue. We hope this solves your problem!
Freezer keeps freezing up already replaced defrost thermostat temperature sensor tested good as well as the fans. Don’t know what else Todo?
For model number WRF736SDAM13
Hello Paul, thank you for reaching out. According to our research, we would recommend checking the freezer door gasket. If it is fine, then the issue could be with the evaporator fan motor, part number FIX11755853. You may need to replace it to fix the issue. Glad to be of assistance!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
