Models > GC3NHAXVA00

GC3NHAXVA00 Whirlpool Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GC3NHAXVA00

Viewing 12 of 12
Keep searches simple, eg. "belt" or "pump".
It is recommended to replace your refrigerator water filter every 6 months or 200 gallons of water. This will ensure consistently good-tasting water that is free of pollutants. This NSF-certified filt...
In Stock
Order now and your part arrives by Mar 22
The lower door closing cam raises the door to keep it from touching the refrigerator liner when the door is closed. It fits both the left and right side of the refrigerator door. The most common reaso...
In Stock
Order now and your part arrives by Mar 22
The pan slide track allows the drawer (also called a snack pan) to slide in and out easily. If the drawer does not easily pull out or push back in, the slide track may be damaged and need to be replac...
In Stock
Order now and your part arrives by Mar 22
If your fridge has stopped making or dispensing ice, you may need to replace the ice maker assembly. Regular wear and tear can cause this part to fail over time, especially if used frequently. To repl...
In Stock
Order now and your part arrives by Mar 22
If the cap for your water filter has become damaged, this is an authentic OEM replacement part that is black in color. The cap is used to remove the old filter and insert the new one. Be sure to first...
In Stock
Order now and your part arrives by Mar 22
Door switch turns the light off when you close the door.
In Stock
Order now and your part arrives by Mar 22
The bi-metal defrost thermostat is attached to the evaporator, and its purpose is to protect the evaporator from overheating when the defrost cycle is running. If there is frost building up in your fr...
In Stock
Order now and your part arrives by Mar 22
This 25-watt light bulb is a genuine OEM replacement part for a variety of appliances. The 120-volt incandescent bulb has a screw-in base and is used to light up the appliance when the door is opened....
In Stock
Order now and your part arrives by Mar 22
This OEM set includes the emitter and receiver boards that control your refrigerator’s ice maker. They detect when the ice bin is full and signal the system to stop or start making ice. A common fix f...
In Stock
Order now and your part arrives by Mar 22
This part is located at the bottom of the ice bucket.
In Stock
Order now and your part arrives by Mar 22
Sold individually.
In Stock
Order now and your part arrives by Mar 22
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order now and your part arrives by Mar 22

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
February 1, 2024
How do I remove the control box on this refrigerator so I can replace the control board inside the box. The control box is spring loaded. It can push up and lock inside the cabinet.Pushing the blue button drops the control box down. I am only able to remove the exterior trim plate.
For model number GC3NHAXVA00
Fix.com logo
Hi Donna, Thank you for your question. Here is a link to one of our YouTube videos that you may reference for information on how to remove and install the control box. The refrigerator in the video may not be the same as yours, but it will give you a general idea on how to remove and install the part. We hope this helps!

Was this helpful?
Thank you for voting!

Common Problems and Symptoms for GC3NHAXVA00

Viewing 23 of 23
Ice maker not making ice
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Light not working
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer not defrosting
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Clicking sound
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not dispensing water
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing Fixing
How to fix it
Frost buildup
Fixed by these parts
Fixing
How to fix it
Door Sweating
Fixed by these parts
Fixing
How to fix it
Freezer too cold
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Too warm
Fixed by these parts
Fixing Fixing
How to fix it
Fridge runs too long
Fixed by these parts
Fixing
How to fix it
Ice maker dispenses too little ice
Fixed by these parts
Fixing Fixing
How to fix it
Ice maker dispenses too much ice
Fixed by these parts
Fixing
How to fix it
Won’t start
Fixed by these parts
Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Steve from Milton, GA
Parts Used:
WP2223320
Difficulty Level:
Difficult
Total Repair Time:
Less than 15 mins
Replaced Two Broken Tracks
The old tracks had been falling out consistently, causing the deli tray to fall on top of the food below it (which included the eggs, though none were broken since they were in a hard plastic container).

I had some difficulty getting the new track installed, however. All the parts lined up, but I just couldn't get the tracks t o slide into place. After some brute force and about 10 minutes, they were finally installed.

Best thing about it is that it doesn't appear that these tracks are coming out easily! Mission accomplished!
539 of 552 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kate from Jacksonville, FL
Parts Used:
EDR3RXD1
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
there were directions
We didn't know where the product went and it was very difficult to install.
754 of 1280 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Phil from Auberry, CA
Parts Used:
2198597
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Ice maker stopped functioning
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the ri ght side. You're done! Reverse procedure for installing. Good luck. Remember, your working with cold plastic...take your time and don't force too much.
463 of 494 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!