Models > WRT108FFDB00

WRT108FFDB00 Whirlpool Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator in...
In Stock
Order now and your part arrives by Nov 23
This screw is sold individually.
In Stock
Order now and your part arrives by Nov 23
Sold Individually.
In Stock
Order now and your part arrives by Nov 23
This refrigerator defrost heater assembly clears frost from the cooling coils. During the automatic defrost cycle, the element produces heat to melt ice from the evaporator and keep airflow passages o...
In Stock
Order now and your part arrives by Nov 23
This screw is sold individually.
In Stock
Order now and your part arrives by Nov 23
This is a 12oz can of black spray paint.
No Longer Available
This Refrigerator Ice Maker Installation Kit connects the house water supply, to the refrigerator for ice maker and water dispenser operation. This kit includes 15-ft of copper tubing, (1) saddle valv...
In Stock
Order now and your part arrives by Nov 23
$49.29
This hinge pin supports proper door alignment and smooth movement during opening and closing. Replacement is recommended when doors sag, bind, or fail to close evenly.
In Stock
Order now and your part arrives by Nov 23
$88.26
In Stock
Order now and your part arrives by Nov 23
$52.50
A cracked, warped, or broken condenser fan blade can make a refrigerator noisy or reduce cooling. This five-blade OEM replacement attaches to the condenser fan motor and moves air across the condenser...
In Stock
Order now and your part arrives by Nov 23
$19.63
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23

Common Problems and Symptoms for WRT108FFDB00

Viewing 3 of 3
Ice maker not making ice
Fixed by these parts
How to fix it
Frost buildup
Fixed by these parts
Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Susan from BONNEAU, SC
Parts Used:
W11229610
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
GASKET AROUND DOOR WAS LETTING AIR IN/ COLD AIR OUT
Put gaskets in the car dash to get warm (90 outside), Pulled off old gasket and brought new one in and just inserted it into the slot around door. Was a little buckled but it straightened out after a few hours. Was very easy!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Edward from SILVER SPRING, MD
Parts Used:
W11773992
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Cheap plastic part prone to break if crisper drawer jams even slightly.
After left side track broke 3 times and then center track also broke, I got tired of buying replacements (even though they are easy to install and not very expensive). So I bought a tube of plastic epoxy and a bit of fiberglass cloth and reinforced the plastic that the (#8 x 1/2 inch) screws go through (where it breaks) on ALL 3 tracks, then redrilled holes, added a washer, and used #8 x 5/8 inch screws). Maybe these wiil last.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Marisa from TEMPE, AZ
Parts Used:
W11729596
Difficulty Level:
Very Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver
Did not have ice maker
Followed online video instructions
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!