Models > WRB543CMJZ00

WRB543CMJZ00 Whirlpool Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WRB543CMJZ00

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
The refrigerator door switch turns the interior light off when the door closes. If the light is not working, the switch may be the cause. This is an OEM replacement. Confirm compatibility using your r...
In Stock
Order now and your part arrives by Nov 22
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...
In Stock
Order now and your part arrives by Nov 22
This appliance hex washer head screw is used to secure brackets, hinges, or other mounted components in place. Its six-sided head offers a solid handhold for a socket or nut driver, while the built-in...
In Stock
Order now and your part arrives by Nov 22
$7.60
Sold individually.
In Stock
Order now and your part arrives by Nov 22
This nylon washer fits at the refrigerator door hinge to reduce friction and help the door open and close smoothly. Replace it if the door sags, rubs, makes a grinding noise, or does not close correct...
In Stock
Order now and your part arrives by Nov 22
This refrigerator water inlet valve controls incoming water for ice making and dispensing. Its electric solenoid opens the valve when water is requested and closes it when the signal ends. Possible si...
In Stock
Order now and your part arrives by Nov 22
$27.83
This refrigerator door stop bracket limits excessive door swing. Mounted near the lower hinge area, it provides a stopping point that helps prevent the door from opening beyond its intended range. A b...
In Stock
Order now and your part arrives by Nov 22
This refrigerator door hinge washer fits over the hinge pin to maintain proper spacing and provide a smooth surface for door movement. It helps support the door while reducing friction between hinge p...
In Stock
Order now and your part arrives by Nov 22
These inserts are used with 1/4 inch plastic tubing.
In Stock
Order now and your part arrives by Nov 22
$26.19
This rear cabinet roller moves the refrigerator more easily for cleaning and maintenance. Mounted beneath the back of the appliance, the wheel supports cabinet weight while allowing forward and backwa...
In Stock
Order now and your part arrives by Nov 22
$17.44
If the cabinet base roller axle needs to be held in place, this kit secures it to the cabinet on select refrigerators and freezers. It is an OEM replacement. Confirm fit using your appliance model number.
In Stock
Order now and your part arrives by Nov 22
$11.98
In Stock
Order now and your part arrives by Nov 22

Common Problems and Symptoms for WRB543CMJZ00

Viewing 6 of 6
Light not working
Fixed by these parts
Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
Fixing
How to fix it
Clicking sound
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Clint from Rayville, MO
Parts Used:
W11384469
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Lights inside refrigerator not working
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
138 of 259 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James Richard from St. Cloud, MN
Parts Used:
W11384469
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Light Switch broke
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.
48 of 78 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Albany, OR
Parts Used:
W11384469
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The light switch on the refridgerator broke - no light.
Once I saw the replacement part I understood how to pry out the switch with a small screwdriver. Then just unplug the old one, plug in the new one and pop it into place.

The PartSelect site made it easy to correctly identify the correct part, it was inexpensive, and the shipping was fast.

I'm very pleased!
36 of 58 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!