Models > MZF34X20DW04

MZF34X20DW04 Whirlpool Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MZF34X20DW04

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$21.82
This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...
In Stock
Order now and your part arrives by Nov 28
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
No Longer Available
This appliance hex washer head screw is used to secure brackets, hinges, or other mounted components in place. Its six-sided head offers a solid handhold for a socket or nut driver, while the built-in...
In Stock
Order now and your part arrives by Nov 28
The white, four-blade OEM evaporator fan blade moves cold air over your refrigerators evaporator coils. A noisy fan or a warm refrigerator can indicate a problem with the blade. Check your refrigerato...
In Stock
Order now and your part arrives by Nov 28
Sold individually.
In Stock
Order now and your part arrives by Nov 28
This temperature sensor is for refrigerators. The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control. Unplug the refrigerator and s...
In Stock
Order now and your part arrives by Nov 28
No Longer Available
To help it sit steadily on uneven flooring, this refrigerator leveling leg adjusts the support height at the base of the appliance. Its threaded design allows the foot to extend or retract, providing ...
In Stock
Order now and your part arrives by Nov 28
$63.68
This refrigerator run capacitor supports steady compressor motor operation. It works with the motor windings to create the electrical conditions needed for efficient running. Check for a weak or faile...
In Stock
Order now and your part arrives by Nov 28
This is a multi-use frame screw that fits a variety of power tools and equipment. Follow installation instructions and safety practices provided in the manual by the manufacturer.
Special Order
$17.44
If the cabinet base roller axle needs to be held in place, this kit secures it to the cabinet on select refrigerators and freezers. It is an OEM replacement. Confirm fit using your appliance model number.
In Stock
Order now and your part arrives by Nov 28
If your refrigerator runs too warm or too cold, or develops frost buildup, its thermistor may need replacement. This OEM part senses refrigerator air temperature for temperature control. Confirm compa...
In Stock
Order now and your part arrives by Nov 28

Common Problems and Symptoms for MZF34X20DW04

Viewing 12 of 12
Fridge too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Frost buildup
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Freezer not defrosting
Fixed by these parts
Fixing Fixing
How to fix it
Too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Fridge and Freezer are too warm
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing
How to fix it
Fridge too cold
Fixed by these parts
Fixing
How to fix it
Freezer section too warm
Fixed by these parts
Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing
How to fix it
Won’t start
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Daniel from BOCA RATON, FL
Parts Used:
W11820444, WPW10141622
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Original bracket foot brake screw hole was stripped and foot brake would not extend
The repair seemed simple, I just needed to remove the old bracket -- 4 screws -- and slip the new one on.

The tricky bit is that the roller bracket holds the weight of the fridge. So in order to make sure that the fridge did not fall over, and to keep the installation point off the ground so that I could align the screw holes, I needed to shim up the side of the fridge that I was working on.

To tap in the shims, I used a hammer and a spare chunk of wood. I ultimately used 3 shims, and kept tapping until the roller wheel could roll freely. Then I knew that the fridge was high enough. After that, it was pretty easy to remove the 4 screws, align the new bracket, and replace the screws. After that, in order to get the shims out I could just extend the foot brake as it was designed, and that lifted the fridge enough for me to easily slide out the shims. After that I just had to level out the fridge by adjusting the two feet.
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from JAMESTOWN, NY
Parts Used:
WPW10383615
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The freezer wasn't defrosting.
took the old thermistor out and put the new one in.
18 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michelle from Richardson, TX
Parts Used:
72017
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
83 of 228 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!