Models > RF24FSEDBSR

RF24FSEDBSR (AA-0008) Samsung Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for RF24FSEDBSR

Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 5 hrs and your part ships today!
On Order
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
In Stock
Order within the next 5 hrs and your part ships today!
No Longer Available
In Stock
Order within the next 5 hrs and your part ships today!

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for RF24FSEDBSR

Viewing 4 of 4
Fridge too warm
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t open or close
Fixed by these parts
Fixing Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Ice maker not making ice
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from GULFPORT, MS
Parts Used:
DA32-10104N
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w hen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
46 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from VISALIA, CA
Parts Used:
DA81-06013A, DA97-13756A, DA32-00011D
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Main refrigerator was not cooling down adequately.
I looked up a YouTube video and it gave pretty well laid out instructions on how to replace the Twin fan assembly in the main compartment.
There was also a suspicion that the sensor wasn't working properly and the fan had ice on it.
Once I removed the main housing at the back of the inside of refrigerator it was relatively easy to replace the fan motor, and sensor.
You have to follow the disassemble procedure closely in getting the main housing out.
You have to remove the clear plate covering the water filter. Then remove the bottom shelf, which then gives you access to the large white back panel. After that its easy to replace the motor and sensor.
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from APPLETON, WI
Parts Used:
DA63-07552A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
veggie drawer door was broke
Basically just popped on the new door and took off the white handle from the old drawer snd snapped that on. Super Easy!!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!