Models > RFG296HDWP > Instructions

RFG296HDWP (XAA-0001) Samsung Refrigerator - Instructions

Jump to:

All Instructions for the RFG296HDWP
1 - 9 of 9
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Joan from ST IGNATIUS, MT
Parts Used:
HAF-QIN/EXP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replacing water filter
piece of cake, take old one out, put new one in!!
13 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alton from LITHONIA, GA
Parts Used:
DA97-07365G
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice maker not making ice
Unscrewed 1 screw, removed panel, disconnected old icemaker and removed it, Added new icemaker, reconnected, replaced panel, replaced screw, & reset new icemaker. Started making ice almost immediately. Threw out entire first load of ice. Working great since! I wasn’t sure if it was the icemaker or the water valve to it so had a guy come out ($50) who confirmed it was the icemaker. He wanted $550 to replace it (part/labor). We bought the part here at Part Select for $185 (part/tax/delivery) and saved $265 on a job that took less than 15 minutes.
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from COCOA BEACH, FL
Parts Used:
DA97-07365G
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No installation instructions came with the product
Went on the Internet to find the installation instructions.
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ralston from PALM COAST, FL
Parts Used:
DA97-07365G
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Ice maker stop working
Once I understand how to remove the old part the rest was very easy .
Had ice in a couple of hours .
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lorraine from FEDERAL WAY, WA
Parts Used:
DA97-06419C
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Cracked Door Bin
Slide the old door bin out. Put the new door bin in. That easy! Fits perfectly!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from WEST JORDAN, UT
Parts Used:
DA97-07365G
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice maker leaking water into ice bin.
Took out Philip’s screw. Applied heat from hand hair dryer for one minute. Unplugged wire plug. Pushed ice maker lever to release and gently pulled forward.Removed old ice maker and replaced with a new maker.
Plugged in wire harness and replaced wire cover.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paula from Cohasset, MA
Parts Used:
DA97-07365G
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Door ice dispenser did not work. The freezer ice maker stopped working years ago.
I am 70 and identified the problem and ordered the part. I watched a video lots of times that showed how to... slowing it down to catch details.
It is very easy... and the only problem was that when you are trying to get the assembly out you need a lot of hand strenght that I don't have.
My son easily wriggled and loosened it and out it came. Plug in the wires and pop the new unit in.
Two hours later I heard the delightful sound of ice dropping into the bucket and amazingly the bottom freezer started making ice too!
There is no mention that they are related but it did. We thought the freezer sensor had died but it all works!

You can do it! Best, pb
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from ANN ARBOR, MI
Parts Used:
DA97-06419C
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken fridge door bin
The description at the website was excellent so I was confident I was ordering the correct replacement bin. And it slid right in with no problems.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sara from BAKERS MILLS, NY
Parts Used:
DA61-03734A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
We misplaced the mounting screws for our handles while moving.
It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.
5 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RFG296HDWP
1 - 9 of 9