Models
>
RS2630SW
RS2630SW (XAA-0000) Samsung Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RS2630SW
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$31.05
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator...
In Stock
Order now and your part arrives by Mar 31
This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compress...
No Longer Available
$9.79
This roller wheel axle pin (part number DA61-01920A) is for refrigerators. Roller wheel axle pin DA61-01920A attaches the roller wheel to the roller wheel bracket. Wear work gloves to protect your han...
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
In Stock
Order now and your part arrives by Mar 31
Special Order
$123.87
This ice dispenser solenoid is for refrigerators. Ice dispenser solenoid shifts the ice container deflector to dispense crushed ice or cubed ice.
In Stock
Order now and your part arrives by Mar 31
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tom from Hudson, WI
- Parts Used:
- DA31-00103A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Condensor fan was not functioning propperly
Unplugged Unit
Removed back cover
removed fan assembly
removed fan balde
opened motor case
replaced motor
sealed the motor case
fastened to fan shroud
re installed fan blade
re attacehd to frig- Carefull of the coolant lines
Plugged in motor assembly
Replaced back cover
Re Plugge ... Read more d in Frig to AC outlet.
Removed back cover
removed fan assembly
removed fan balde
opened motor case
replaced motor
sealed the motor case
fastened to fan shroud
re installed fan blade
re attacehd to frig- Carefull of the coolant lines
Plugged in motor assembly
Replaced back cover
Re Plugge ... Read more d in Frig to AC outlet.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Newtown Square, PA
- Parts Used:
- DA31-00103A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
stripe down ctr of side by side refrigerator
unplugged first, then Pulled out frig and took out fan motor. plugged in to be sure it worked. waited few minutes and it started running. then placed everything back where it belonged. Talked to appliance store and told me what the problem was but it would take longer for them to get then for me to order on line. Best way to get it do
... Read more
ne... No directions on box...
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RUSSELL from LAS VEGAS, NV
- Parts Used:
- DA66-00294A
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Lever Dispenser-Ice Was Broken.
Using the putty knife, pry off the faceplate for the ice/water dispenser. Disconnect the wire harness. Using philips head screwdriver, remove the dispenser assembly. Remove the old dispenser and replace. Reverse for reassembly. Note * I should have bought the water dispenser lever and replaced it as well since I had the assembly out.
... Read more
Secondary note * be mindful during reassembly to not put pressure on the water dispenser or have a glass handy. :)
Read less
Was this instruction helpful to you?
Thank you for voting!