This OEM door mullion spring is found in French door style refrigerators, and is used to apply tension between components in the fridge doors. The spring engages and retracts the door flap, which allo...
This door guard, commonly referred to as door shelf or bin, is specially made for Samsung refrigerators. It is an authentic OEM replacement part, sourced directly from Samsung to ensure the best fit w...
This ice maker assembly in your bottom-freezer refrigerator automatically produces and dispense ice. It consists of a mold for 9 ice cubes, a control device, and a 12-pin wiring connection and housing...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This is a 40W/120V ice maker assembly for your refrigerator. Ice maker assemblies are designed to continuously make ice cubes by supplying water through its valve, freezing it, and then ejecting the c...
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Henry
May 19, 2022
Does the water dispenser have a solenoid
For model number RFG298AARS
Hello Henry, Thank you for the question. Checking the model it shows a Ice Solenoid, Fix Number: FIX4163419. The Water Dispenser does not list a Solenoid. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
How does the water get to the water dispenser. I have a drip and need to trace the path
For model number RFG298AARS
Hello Henry, Thank you for the question. There is a water line that feed the dispenser from the Water Filter and Housing. If the water line and filter housing are good and the filter has been changed in the last 6 months, you may have a faulty Water Inlet Valve. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
This fridge has a bottom freezer ice maker that has stopped working. I have reset it using the button on the ice maker and also powering it down.
I found a small leak coming from a water line going into a recessed plastic box with 2 screws holding the fitting in the box. I assume this supplies the water to the bottom freezer but I do not see this part on a diagram so can’t replace it. I can send a picture if needed. If you give me an email to use.
For model number RFG298AARS
Hello Trevor, thank you for the question. The part you are looking for is ice maker fill tube, part number FIX4173298. Replacing this part may solve the issue. Good luck with your repair!
OMG seriously! I stopped into my go-to appliance repair shop to ask about what might be needed to repair the problem with my refrigerator door. They said you will need to replace the Mullion Flap piece. Cost would be $250-300 with part, labor and service. I went on line to see if I could handle the repair process myself. I found a How to
... Read more - U Tube video and turns out I only needed to replace a little spring and pin not the whole Mullion Flap. Went to Parts select, ordered the spring and pin and did the repair myself in about 5 minutes. Shipping was $7 so I ended up paying $13 total.
The installation video notes that the door mullion spring has a bent end, and that the bent end of the spring is to be inserted into the LOWER hinge. However, on my refrigerator door, the bent end of the door mullion spring must be inserted into the UPPER hinge in order for the door to function properly. (Also noted that in your video t
... Read morehe installer manually closed the door mullion rather than just closing the refrigerator door, another indication that the installation of the spring was incorrect.) After watching the video several times to confirm I was installing the door mullion spring according to the video instructions, I tried inserting the bent end of the door mullion spring into the upper hinge, which proved to be the correct installation of the door mull spring. What should have been a 5 minute repair turned into an ½ hour repair.
Placed new spring pin and new spring in place with pliers-10 seconds tops. HOWEVER!! Your instruction video is INCORRECT. Spring must be placed opposite of video with bent side toward million otherwise million is flipped outward not held closed. Two frustrating days before I figured that out.
