Models > RF4289HARS/XAA > Instructions

RF4289HARS/XAA Samsung Refrigerator - Instructions

Jump to:

All Instructions for the RF4289HARS/XAA
1 - 6 of 6
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Alton from LITHONIA, GA
Parts Used:
DA97-07365G
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice maker not making ice
Unscrewed 1 screw, removed panel, disconnected old icemaker and removed it, Added new icemaker, reconnected, replaced panel, replaced screw, & reset new icemaker. Started making ice almost immediately. Threw out entire first load of ice. Working great since! I wasn’t sure if it was the icemaker or the water valve to it so had a guy come out ($50) who confirmed it was the icemaker. He wanted $550 to replace it (part/labor). We bought the part here at Part Select for $185 (part/tax/delivery) and saved $265 on a job that took less than 15 minutes.
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from COCOA BEACH, FL
Parts Used:
DA97-07365G
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No installation instructions came with the product
Went on the Internet to find the installation instructions.
5 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ralston from PALM COAST, FL
Parts Used:
DA97-07365G
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Ice maker stop working
Once I understand how to remove the old part the rest was very easy .
Had ice in a couple of hours .
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gina from PENSACOLA, FL
Parts Used:
DA97-12522A
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Ice build up in freezer because of hard gasket.
Took both drawers out. Took out the 4 bolts holding the door in place. Took old gasket off. Started in a corner placing new gasket on the door and continued around the door until gasket was completely secured onto the door. Put door back on sliding hinges and put 4 bolts back in the holes. Closed the door. Very simple.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eleanor from O FALLON, IL
Parts Used:
DA97-08406A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken Refrigerator door
I was able to receive this replacement order in record time! It was easy to install as no tools were needed. the product was of excellent quality. In the future and if needed, I will definitely utilize this service again in the future.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sara from BAKERS MILLS, NY
Parts Used:
DA61-03734A
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
We misplaced the mounting screws for our handles while moving.
It was easy! I just used an alan wrench to losen the side bolt, then slid the handle into the new mounting screws that I had hand-screwed and then tightened it all up.
3 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RF4289HARS/XAA
1 - 6 of 6