Models
>
MBV1976AAP
MBV1976AAP Maytag Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MBV1976AAP
Viewing 4 of 4Manuals & Guides for MBV1976AAP
Click to downloadKeep searches simple, eg. "belt" or "pump".
In Stock
In Stock
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from Naples, FL
- Parts Used:
- 11001182
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Maytag SkyBox would not dispense
First removed the two screws that hold the flapper door switch in place. Then unplugged door from main unit and removed door. Removed the door gasket. Placed door face down on table and removed about 14 screws to expose the the plug end of the switch assembly.
Plug in the new switch assembly and thread thru hole. Reinstall ... Read more the door panel. Reinstall the gasket. Reinstall the switch cover. Rehang the door and plug to main unit. The machine now properly dispenses cans.
Plug in the new switch assembly and thread thru hole. Reinstall ... Read more the door panel. Reinstall the gasket. Reinstall the switch cover. Rehang the door and plug to main unit. The machine now properly dispenses cans.
Read less
Was this instruction helpful to you?
Thank you for voting!
Machine reported a jam every time a can was dispensed
Removed fridge door by opening all the way and lifting up ( don't forgit to unplug wire harness)
Removed all screws on back side holding two faces together, replaced parts.
Removed all screws on back side holding two faces together, replaced parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Mooresville, NC
- Parts Used:
- 11001182
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Maytag Skybox LEDs flash won't dispense
Door flapper sensor malfunctions and will not dispensense more than 1 without reseting appliance by opening and closing the door. Remove 2 screws by sensor. Remove door seal. Under the door seal remove 14 screws that hold door facing on. plug new sensor cable into board and reassemble. Count on doing every 2 - 3 years. This part is
... Read more
destroyed by condensation so consider stocking up on it, who knows how long it will be available.
Read less
Was this instruction helpful to you?
Thank you for voting!