Models > RB21JN-4A

RB21JN-4A (9A24A) Magic Chef Refrigerator

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for RB21JN-4A

Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
This is a genuine OEM replacement part. This is a door shelf trim retainer designed for use with refrigerators. The purpose of the retainer is to hold the door shelf in place on the door. This replace...
In Stock
Order within the next 3 hrs and your part ships today!
This is an OEM part sourced directly from the manufacturer. This gasket is designed for used on the fresh food door on your refrigerator. When the door is closed this gasket creates a seal, this preve...
In Stock
Order within the next 3 hrs and your part ships today!
$6.80
Sold individually.
In Stock
Order within the next 3 hrs and your part ships today!
$11.14
This is a genuine OEM replacement part. This egg tray is designed for use with refrigerators. This tray fits inside a compartment on the door of your refrigerator, and it holds up to fourteen eggs. T...
In Stock
Order within the next 3 hrs and your part ships today!
This is an OEM part sourced directly from the manufacturer. This is a bushing used in the assembly of refrigerators. This bushing is used alongside the hinge pin, and is designed for use with a ? inch...
No Longer Available
Sold Individually.
No Longer Available
This is an OEM part sourced directly from the manufacturer. This retainer bar is designed for use with your refrigerator. It is cut-to-fit the door shelf on the inside of your appliance. It is simple ...
In Stock
Order within the next 3 hrs and your part ships today!
This door hinge washer is used between the lower hinge pin and the lower hinge bushing.
No Longer Available
This white freezer door gasket is used to seal the freezer door when closed to keep the cool air inside and the room air out.
No Longer Available
$7.14
This is an authentic OEM replacement part. This washer is used in the assembly of refrigerators; most often it is used in conjunction with the door hinge. For exact placement we recommend you refer to...
In Stock
Order within the next 3 hrs and your part ships today!
No Longer Available
$22.45
Special Order

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for RB21JN-4A

Viewing 1 of 1
Door Sweating
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Joel from Upper Arlington, OH
Parts Used:
WP70048-3, 70047-3
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Socket set
failure to seal fridge doors adequately.
The doors had many hex screws. Using the correct socket size was critical. Empty the door shelves first. The screws had to come out because the new seal had slot holes for them to go between. Take off half of the screws from the top and sides and partially remove the old seal. Attach the new seal and do the same with the bottom half. With the new seal on the lower door it at first looks like a poor seal. Gently press the door and hold it for about 5 min. Then the seal is ok. The door can then can be open and shut gently with a good seal. With a good set of sockets the work can go faster than the time given.
15 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenneth from Marble Falls, TX
Parts Used:
WP70048-3, 66036-1
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
door sagging (bushings gone), seal bad
r#1 removed upper hinge bracket, removed icebox door, unscrewed middle hinge bracket, removed main door, extracted broken plastic bushings, pushed in new bushings, reversed process while adjusting doors. works fine now.

#2 compared door seal with new one from partselect. Turned out that new seal is not magnetic. Had to return. Door still has bad seal.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from Malden, MA
Parts Used:
WP70048-3
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
Needed To Replace Gasket/Seal On Fridge
Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!