Models
>
RB19KA-4A
RB19KA-4A (AG64B) Magic Chef Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RB19KA-4A
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$11.72
This is a genuine OEM replacement part. This is a door shelf trim retainer designed for use with refrigerators. The purpose of the retainer is to hold the door shelf in place on the door. This replace...
In Stock
This is an OEM part sourced directly from the manufacturer. This gasket is designed for used on the fresh food door on your refrigerator. When the door is closed this gasket creates a seal, this preve...
In Stock
In Stock
$11.14
This is a genuine OEM replacement part. This egg tray is designed for use with refrigerators. This tray fits inside a compartment on the door of your refrigerator, and it holds up to fourteen eggs. T...
In Stock
This is an OEM part sourced directly from the manufacturer. This retainer bar is designed for use with your refrigerator. It is cut-to-fit the door shelf on the inside of your appliance. It is simple ...
In Stock
This door hinge washer is used between the lower hinge pin and the lower hinge bushing.
No Longer Available
This white freezer door gasket is used to seal the freezer door when closed to keep the cool air inside and the room air out.
No Longer Available
$38.59
This is a genuine OEM replacement part. This door spacer washer is commonly used on refrigerators and ranges. It is most often part of the lower hinge assembly, usually being placed on the pin that fi...
Special Order
Sold Individually. This screw holds the handle in place on the freezer door.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for RB19KA-4A
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
failure to seal fridge doors adequately.
The doors had many hex screws. Using the correct socket size was critical. Empty the door shelves first. The screws had to come out because the new seal had slot holes for them to go between. Take off half of the screws from the top and sides and partially remove the old seal. Attach the new seal and do the same with the bottom half. With
... Read more
the new seal on the lower door it at first looks like a poor seal. Gently press the door and hold it for about 5 min. Then the seal is ok. The door can then can be open and shut gently with a good seal. With a good set of sockets the work can go faster than the time given.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Mobile, AL
- Parts Used:
- WP70048-3
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver
Gasket wouldn't seal all the way around
Due to some deformity of the gasket, it didn't seal all the way around. The instructions suggested using a heat light to warm the gasket with the door open. That didn't work too well so I closed the door and used a heat gun lightly in the areas it didn't seal. That worked great to soften the gasket so the magnet in the gasket could pull
... Read more
it gasket tight to the refrigerator. I let it cool with the door closed and it now seals perfectly.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Malden, MA
- Parts Used:
- WP70048-3
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
Needed To Replace Gasket/Seal On Fridge
Most importantly make sure you get the wrinkles out of the gasket, a step we did not follow exactly, so we ended up having to work the seal a lot more to make it fit properly which of course made the repair take longer than needed. Other than that no problems here
Was this instruction helpful to you?
Thank you for voting!